powered by

Verify Fitment and Headroom in Space

From How to Check Your Stairs Against Building Code · Step 9 of 10 · Video by HouseImprovements

Showing 10:28–12:22 of the source video. Watch the full video with every moment.

What happens in this clip

The speaker moves to the location where the staircase will be built to check if the calculated total run (136 1/2 inches) fits. He also re-measures the headroom at the point where the head might hit the ceiling when descending the stairs. With a headroom of 7 feet (84 inches), it comfortably exceeds the local code's minimum of 76 3/4 inches. He stresses that while you can always have more headroom, you cannot have less than the code dictates. This step ensures the planned staircase dimensions are practical and compliant.

Goal: Physically verify that the calculated total run fits within the available space and re-confirm the headroom clearance at the top of the stairs, ensuring it meets or exceeds code requirements.

What's used

Tools

  • Tape Measure

About the full video

This video provides a detailed guide on planning and dimensioning a staircase, focusing on understanding building codes, measuring key components like total rise, total run, headroom, and selecting appropriate materials. It covers essential terminology, calculation methods, and practical considerations for ensuring a safe and compliant staircase installation.

What's said in this clip

my distance from so my that means my stair set of stairs is going to run right from that surface up there to the end of the last Riser is going to be 1362 in okay so now we've got our total run of the stair case let's see if it works out down here so I swung you to the other end now so the where the top of the stairs is going to be as right over top the camera so we've got 136 in from that point back just behind the camera to the end of our step now that ends up coming out basically exactly uh so that um our last step is just past this wall okay so top of step is going to be down in this range right here and I know that because I know how many uh Rises I have which is two Rises so I can mark that on the wall measure down from my this is what my head room's going to be this is where I'm going to hit my head when I come down so right from there down to that Mark we've got basically 7 fet so 7 feet is 84 in uh in my area I've only got to be uh 67 and 3/4 or sorry 76 and 3/4 so we've got plenty of room like I said before 80 head room is nice it's better for moving furniture and stuff but check your local code to see exactly what minimum is for you you can always have more can't have less okay so it looks like that's all going to work out um so we've got all our information now to go and be able to start laying out the the Treads and cutting them I'm going to show you the

Automatically transcribed from the source video.

Step 9 of 10: Check Headroom

Measure the vertical distance from the top of the stair tread (or landing) to the lowest obstruction above it (e.g., ceiling, beam, light fixture). Building codes typically require a minimum headroom of 80 inches (6 feet 8 inches) throughout the entire stair and landing area.

Open this step in the guide

Every video in How to Check Your Stairs Against Building Code

  1. Step 1: Measure Stair Rise

  2. Step 2: Measure Stair Run

  3. Step 3: Check for Consistent Riser Height

  4. Step 4: Check for Consistent Tread Depth (Run)

  5. Step 5: Inspect Tread Nosing

  6. Step 6: Check Stair Width

  7. Step 7: Inspect Handrails

  8. Step 8: Inspect Balusters and Guardrails

  9. Step 9: Check Headroom

  10. Step 10: Evaluate Landing Requirements

How to Check Your Stairs Against Building Code

This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Verify Fitment and Headroom in Space — How to Check Your Stairs Against Building Code | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.