powered by

Identify Landing Size Requirements

From How to Check Your Stairs Against Building Code · Step 10 of 10 · Video by gregvancom

Showing 17:28–23:43 of the source video. Watch the full video with every moment.

What happens in this clip

The video addresses the specific requirements for stair landings, both at the top, bottom, and any intermediate points of a staircase. For single-family homes, the minimum landing depth and width are generally 3 feet by 3 feet. However, for public buildings or stairs with an occupancy load greater than 50 people, the minimum width of the landing must match the minimum width of the stairway, which is typically 44 inches. The depth of the landing in these cases must also be at least 44 inches. For staircases with a total vertical rise exceeding 12 feet, an intermediate landing is required to break up the flight, regardless of whether it's residential or public. This is a crucial safety feature to prevent long, uninterrupted falls.

Goal: Understand the minimum dimensions and placement requirements for stair landings based on building codes.

What's used

Tools

  • Building Codes International Building Code (IBC) or local codes
  • Measuring Tape

About the full video

This video provides a detailed explanation of building code requirements for staircases, covering aspects such as the 'walk line', tread depth, riser height, step variation, and landing dimensions. It differentiates between codes for private dwellings and public buildings, and demonstrates how to calculate the number of steps and acceptable riser heights based on total rise. The video emphasizes the importance of understanding and adhering to local building codes to ensure safety and compliance in stair construction.

What's said in this clip

the 2018 International Building Codebook of what's actually required for or to figure out the width and depth of a landing stair landing. Now, the first thing they point out is that a stair landing is at the top and the bottom of the stairway and that it needs to be the same depth as the width of the stairway. So, this is important. There's only going to be one exception to this rule, and that's when we get to stairways larger than 48 in wide. So, if you have a single family home, which I would imagine the bulk of the people watching this video are looking for information for their for the homes that they live in or maybe something you're remodeling or building. Now, I need to point out that this information isn't going to be accepted all of us all the time by your local building authorities, your building department. So, if you're building something new or remodeling something, always check with them to make sure that what they require because if they change a little bit, then you know, you could be in for a nightmare. And I also need to point out that there are so many rules and regulations in the building codes that some of the people who check the plans don't always check certain things in their mind. They have certain measurements locked in and so they might not be checking it. And these building codes might not have applied to those stairs built in the past, but might apply to the stairs built in the future. So when you go to someone's house and you say, "Wait a minute, this doesn't work here." That's fine. But these building codes from the 2018 International Building Code Book look like they might have changed. So let's go ahead and get started. If you live in a home, single family home or a building with a occupant load of less than 50 people, then uh 36 in by 36 in 3T by 3T at the bottom will be a minimum. The stair width is 36 in wide, 36 in deep. And at the top, you would need the same distance, 3T minimum, 3T in depth. It can be bigger, just can't be smaller. Now, these measurements are going to change if you come to a public building or a building with an occupant load of more than 50. And of course, that means that the width, minimum width on a stairway is going to now change to 44 in or 3T8, bringing the depth of the landing to 3'8 in also. So single family homes is probably not going to apply to you, but this will to practically every other stairway built. So again, 44 in at the at a landing that's in the stairway by 44 in. And of course,…

Automatically transcribed from the source video.

Step 10 of 10: Evaluate Landing Requirements

Verify that landings are provided at the top and bottom of each flight of stairs. Ensure that any landing is at least as wide as the stairs it serves. If the stairs change direction, the landing must be at least as wide as the stair and also as long as the stair is wide. Check that landings are level and securely attached.

Open this step in the guide

Every video in How to Check Your Stairs Against Building Code

  1. Step 1: Measure Stair Rise

  2. Step 2: Measure Stair Run

  3. Step 3: Check for Consistent Riser Height

  4. Step 4: Check for Consistent Tread Depth (Run)

  5. Step 5: Inspect Tread Nosing

  6. Step 6: Check Stair Width

  7. Step 7: Inspect Handrails

  8. Step 8: Inspect Balusters and Guardrails

  9. Step 9: Check Headroom

  10. Step 10: Evaluate Landing Requirements

Questions about How to Check Your Stairs Against Building Code

Why do I need both a dial caliper and a pocket caliper, and what are they used for?

These specialized tools are crucial for precise measurements of small details like tread nosing projection and baluster spacing, which often have tight code tolerances. While a tape measure handles overall dimensions, calipers ensure the accuracy needed for these critical, smaller elements to confirm compliance.

What safety precautions should I take while inspecting my stairs?

Ensure the staircase is well-lit to clearly see all features and potential hazards. Be cautious if treads feel loose, handrails are wobbly, or if there are any obvious signs of structural instability. Do not attempt repairs during inspection; simply identify issues.

Is the 4-hour estimate realistic for a beginner, or could this project take longer?

The 4-hour estimate is a general guideline for an average straight staircase. If you have multiple flights, complex turns, or find yourself needing to re-measure for accuracy, it could take longer. Take your time to ensure all measurements are precise.

What are the most common building code violations people overlook when checking stairs?

Many people miss inconsistencies in riser height or tread depth, even by small fractions, which are significant tripping hazards. Other common issues include improper handrail height or grip, baluster spacing wider than 4 inches, and insufficient headroom clearance.

What should I do if my existing stairs don't meet current building codes?

Document all identified violations with measurements and photos. Prioritize immediate safety hazards. For significant issues, consult with a licensed contractor or your local building department to understand the necessary steps and potential costs for bringing your stairs up to code.

How to Check Your Stairs Against Building Code

This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Identify Landing Size Requirements — How to Check Your Stairs Against Building Code | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.