Minimum Stairway Width
From How to Check Your Stairs Against Building Code · Step 6 of 10 · Video by gregvancom

Showing 1:36–2:19 of the source video. Watch the full video with every moment.
What happens in this clip
Learn that the minimum required width for a stairway is 36 inches. This measurement is crucial and must be met *after* all finishing elements have been installed. This includes drywall, wood trim, skirt boards, and any other materials that will be added to the sides of the walls enclosing the stairway. When designing or constructing a stairway between two walls, it is important to factor in the thickness of these finishing materials to ensure the final clear width meets the 36-inch minimum.
Goal: Ensure minimum 36-inch stairway width after finishes.
What's used
Tools
- Tape Measure
About the full video
This project offers a comprehensive guide for DIY enthusiasts on essential stair building codes based on the 2021/2022 International Residential Building Code. It systematically breaks down regulations concerning door swings over stairs, minimum stairway width, required headroom clearance, individual riser height limits, minimum tread depth, landing dimensions, allowable variations in riser and tread measurements, and exceptions for non-habitable attic and crawl space access. The goal is to provide a solid foundation of knowledge for planning and executing safe and compliant stair construction or renovation projects.
What's said in this clip
In this video, I will provide you with the top five stair building codes in my opinion that you will need to be aware of when building a set of stairs with a landing. And the first one on the list will be the minimum width of the stairway and that will be 36 inches. Now that is 36 inches after everything is finished after the drywall has been installed and after any of the wood trim has been installed. So if you have a stairway that is going to be in between two walls, then you might want to allow for anything you're going to be adding to the side of those walls. Like drywall wood trim or skirt board. Next up on the list will be the minimum headroom height and that line will be measured from this line here or the front of each step, but it will not be measured from the top of the step on any other part of the step.
Automatically transcribed from the source video.
Step 6 of 10: Check Stair Width
Measure the clear width of the stair tread from one handrail or wall to the other. Building codes typically require a minimum stair width of 36 inches for most residential applications to allow for safe passage.
Every video in How to Check Your Stairs Against Building Code
Step 1: Measure Stair Rise
Step 2: Measure Stair Run
- 0:42–0:56 Measure and Verify Rise and Run
- 0:52–2:34 Measuring Rise and Run
- 2:00–2:24 Analyzing Stairway with Consistent Nosings (Correct Design)
Step 3: Check for Consistent Riser Height
- 0:31–1:01 Measure Riser Height and Tread Depth Consistency
- 4:28–6:49 Maximum Riser and Tread Difference
- 3:09–3:40 Set Riser Height and Consistency
Step 4: Check for Consistent Tread Depth (Run)
Step 5: Inspect Tread Nosing
Step 6: Check Stair Width
- 1:36–2:19 Minimum Stairway Width (this video)
- 1:34–2:22 Determine Overall Stair Width
- 0:00–0:40 Understand Minimum Stairway Width
Step 7: Inspect Handrails
- 0:24–0:42 Check Railing Height
- 4:07–4:38 Inspect Commercial Stair Handrails
- 1:50–2:05 Measure Handrail Height
Step 8: Inspect Balusters and Guardrails
- 5:28–6:08 Check Guardrail Openings
- 0:29–0:58 Measure Baluster Spacing for Code Compliance
- 0:25–0:29 Check Guardrail Opening Size
Step 9: Check Headroom
- 2:19–2:52 Minimum Headroom Height
- 0:40–1:12 Determine Minimum Headroom Height
- 10:28–12:22 Verify Fitment and Headroom in Space
Step 10: Evaluate Landing Requirements
- 12:40–15:25 Understand Landing Code Requirements
- 17:28–23:43 Identify Landing Size Requirements
- 6:03–6:46 Implement Landings
How to Check Your Stairs Against Building Code
This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

