powered by

Specify Nosing Requirements

From How to Check Your Stairs Against Building Code · Step 5 of 10 · Video by Perkins Builder Brothers

Showing 4:57–5:37 of the source video. Watch the full video with every moment.

What happens in this clip

If stair treads are less than 11 inches deep, a nosing (overhang) is required. The nosing must protrude between 3/4 inch and 1 1/4 inches beyond the riser below. Additionally, the radius of the front edge of the nosing cannot exceed 9/16 inch to prevent a tripping hazard. Like other stair dimensions, the nosing depth must be consistent throughout a flight, with a maximum variance of 3/8 inch.

Goal: Apply nosing between 3/4 inch and 1 1/4 inch projection if treads are less than 11 inches deep, ensuring correct radius and minimal variance.

What's used

Tools

  • Pencil

About the full video

This video provides a comprehensive overview of essential building codes and framing formulas for constructing safe and compliant stairs. It covers critical dimensions such as overall width, headroom, vertical rise, riser height, tread depth, nosing specifications, tread slope, landing requirements, and rules for winder stairs and open risers, emphasizing safety and legal compliance.

Step 5 of 10: Inspect Tread Nosing

The nosing is the projecting edge of the tread. Codes often specify that the nosing should not exceed a certain projection (typically 1 to 1.5 inches) and that the radius of the nosing should be consistent. Some codes may require that the bottom of the nosing should not extend beyond the face of the riser below it by more than 1/2 inch to prevent toe-catching.

Open this step in the guide

Every video in How to Check Your Stairs Against Building Code

  1. Step 1: Measure Stair Rise

  2. Step 2: Measure Stair Run

  3. Step 3: Check for Consistent Riser Height

  4. Step 4: Check for Consistent Tread Depth (Run)

  5. Step 5: Inspect Tread Nosing

  6. Step 6: Check Stair Width

  7. Step 7: Inspect Handrails

  8. Step 8: Inspect Balusters and Guardrails

  9. Step 9: Check Headroom

  10. Step 10: Evaluate Landing Requirements

How to Check Your Stairs Against Building Code

This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Specify Nosing Requirements — How to Check Your Stairs Against Building Code | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.