Implement Landings
From How to Check Your Stairs Against Building Code · Step 10 of 10 · Video by Perkins Builder Brothers

Showing 6:03–6:46 of the source video. Watch the full video with every moment.
What happens in this clip
For outdoor stairs, landings are explicitly required at both the top and bottom. These landings must be at least the same width as the stairs and a minimum of 36 inches deep in the direction of travel. For indoor stairs, landings are not strictly required unless a door swings out over the stair area. If a door is present, it must swing inward, away from the stairs, to eliminate the need for a landing.
Goal: Install landings at the top and bottom of outdoor stairs, ensuring they match stair width and are at least 36 inches deep.
What's used
Tools
- Pencil
About the full video
This video provides a comprehensive overview of essential building codes and framing formulas for constructing safe and compliant stairs. It covers critical dimensions such as overall width, headroom, vertical rise, riser height, tread depth, nosing specifications, tread slope, landing requirements, and rules for winder stairs and open risers, emphasizing safety and legal compliance.
Step 10 of 10: Evaluate Landing Requirements
Verify that landings are provided at the top and bottom of each flight of stairs. Ensure that any landing is at least as wide as the stairs it serves. If the stairs change direction, the landing must be at least as wide as the stair and also as long as the stair is wide. Check that landings are level and securely attached.
Every video in How to Check Your Stairs Against Building Code
Step 1: Measure Stair Rise
Step 2: Measure Stair Run
- 0:42–0:56 Measure and Verify Rise and Run
- 0:52–2:34 Measuring Rise and Run
- 2:00–2:24 Analyzing Stairway with Consistent Nosings (Correct Design)
Step 3: Check for Consistent Riser Height
- 0:31–1:01 Measure Riser Height and Tread Depth Consistency
- 4:28–6:49 Maximum Riser and Tread Difference
- 3:09–3:40 Set Riser Height and Consistency
Step 4: Check for Consistent Tread Depth (Run)
Step 5: Inspect Tread Nosing
Step 6: Check Stair Width
- 1:36–2:19 Minimum Stairway Width
- 1:34–2:22 Determine Overall Stair Width
- 0:00–0:40 Understand Minimum Stairway Width
Step 7: Inspect Handrails
- 0:24–0:42 Check Railing Height
- 4:07–4:38 Inspect Commercial Stair Handrails
- 1:50–2:05 Measure Handrail Height
Step 8: Inspect Balusters and Guardrails
- 5:28–6:08 Check Guardrail Openings
- 0:29–0:58 Measure Baluster Spacing for Code Compliance
- 0:25–0:29 Check Guardrail Opening Size
Step 9: Check Headroom
- 2:19–2:52 Minimum Headroom Height
- 0:40–1:12 Determine Minimum Headroom Height
- 10:28–12:22 Verify Fitment and Headroom in Space
Step 10: Evaluate Landing Requirements
- 12:40–15:25 Understand Landing Code Requirements
- 17:28–23:43 Identify Landing Size Requirements
- 6:03–6:46 Implement Landings (this video)
How to Check Your Stairs Against Building Code
This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

