Measure Handrail Height
From How to Check Your Stairs Against Building Code · Step 7 of 10 · Video by Your New House

Showing 1:50–2:05 of the source video. Watch the full video with every moment.
What happens in this clip
Another critical safety dimension is the handrail height. Measuring from the bottom of the step to the top of the handrail, the height must be between 34 and 38 inches, as required by code. The host explains that a handrail outside this range can be either too difficult to grasp securely (if too tall) or allow someone to fall over the front (if too short).
Goal: Ensure handrail height is within code-compliant range
What's used
Tools
- Tape Measure
About the full video
This video provides essential guidelines for constructing residential staircases, focusing on key safety and comfort standards from the Uniform Building Code. It covers proper dimensions for rise and run, handrail height and continuity, baluster spacing, and required headroom, ensuring the staircase is safe, easy to navigate, and meets regulatory requirements.
Step 7 of 10: Inspect Handrails
Check that handrails are installed at a height between 34 and 38 inches above the tread nosings. Ensure the handrail is continuous and runs the full length of the stairs. Test for stability by applying firm pressure. The graspable diameter or shape of the handrail should also comply with code (e.g., typically between 1.25 and 2 inches in circumference or cross-sectional dimension).
Every video in How to Check Your Stairs Against Building Code
Step 1: Measure Stair Rise
Step 2: Measure Stair Run
- 0:42–0:56 Measure and Verify Rise and Run
- 0:52–2:34 Measuring Rise and Run
- 2:00–2:24 Analyzing Stairway with Consistent Nosings (Correct Design)
Step 3: Check for Consistent Riser Height
- 0:31–1:01 Measure Riser Height and Tread Depth Consistency
- 4:28–6:49 Maximum Riser and Tread Difference
- 3:09–3:40 Set Riser Height and Consistency
Step 4: Check for Consistent Tread Depth (Run)
Step 5: Inspect Tread Nosing
Step 6: Check Stair Width
- 1:36–2:19 Minimum Stairway Width
- 1:34–2:22 Determine Overall Stair Width
- 0:00–0:40 Understand Minimum Stairway Width
Step 7: Inspect Handrails
- 0:24–0:42 Check Railing Height
- 4:07–4:38 Inspect Commercial Stair Handrails
- 1:50–2:05 Measure Handrail Height (this video)
Step 8: Inspect Balusters and Guardrails
- 5:28–6:08 Check Guardrail Openings
- 0:29–0:58 Measure Baluster Spacing for Code Compliance
- 0:25–0:29 Check Guardrail Opening Size
Step 9: Check Headroom
- 2:19–2:52 Minimum Headroom Height
- 0:40–1:12 Determine Minimum Headroom Height
- 10:28–12:22 Verify Fitment and Headroom in Space
Step 10: Evaluate Landing Requirements
- 12:40–15:25 Understand Landing Code Requirements
- 17:28–23:43 Identify Landing Size Requirements
- 6:03–6:46 Implement Landings
How to Check Your Stairs Against Building Code
This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

