Determine Minimum Headroom Height
From How to Check Your Stairs Against Building Code · Step 9 of 10 · Video by stairbuilding

Showing 0:40–1:12 of the source video. Watch the full video with every moment.
What happens in this clip
Next, the video details the minimum headroom height requirement for stairways. The code states that the headroom, which is the vertical distance from the walking surface of the stair to the ceiling or any overhead obstruction, must be not less than 6 feet 8 inches. It's emphasized that this measurement is taken straight up (plumb or vertically level) from the front edge of each step. It specifically notes that the measurement should not be taken from the top or any other part of the step itself, as this would not accurately reflect the clear vertical space for users.
About the full video
This video provides a detailed overview of essential building code requirements for wooden stair framing, drawing from the 2021 International Residential Code. It covers critical dimensions such as minimum stairway width, headroom, individual riser height, tread depth, and stair landing depth. Additionally, it clarifies the distinct requirements for clear width in relation to guardrails and grippable handrails, emphasizing the importance of checking local building authorities for specific regulations.
Step 9 of 10: Check Headroom
Measure the vertical distance from the top of the stair tread (or landing) to the lowest obstruction above it (e.g., ceiling, beam, light fixture). Building codes typically require a minimum headroom of 80 inches (6 feet 8 inches) throughout the entire stair and landing area.
Every video in How to Check Your Stairs Against Building Code
Step 1: Measure Stair Rise
Step 2: Measure Stair Run
- 0:42–0:56 Measure and Verify Rise and Run
- 0:52–2:34 Measuring Rise and Run
- 2:00–2:24 Analyzing Stairway with Consistent Nosings (Correct Design)
Step 3: Check for Consistent Riser Height
- 0:31–1:01 Measure Riser Height and Tread Depth Consistency
- 4:28–6:49 Maximum Riser and Tread Difference
- 3:09–3:40 Set Riser Height and Consistency
Step 4: Check for Consistent Tread Depth (Run)
Step 5: Inspect Tread Nosing
Step 6: Check Stair Width
- 1:36–2:19 Minimum Stairway Width
- 1:34–2:22 Determine Overall Stair Width
- 0:00–0:40 Understand Minimum Stairway Width
Step 7: Inspect Handrails
- 0:24–0:42 Check Railing Height
- 4:07–4:38 Inspect Commercial Stair Handrails
- 1:50–2:05 Measure Handrail Height
Step 8: Inspect Balusters and Guardrails
- 5:28–6:08 Check Guardrail Openings
- 0:29–0:58 Measure Baluster Spacing for Code Compliance
- 0:25–0:29 Check Guardrail Opening Size
Step 9: Check Headroom
- 2:19–2:52 Minimum Headroom Height
- 0:40–1:12 Determine Minimum Headroom Height (this video)
- 10:28–12:22 Verify Fitment and Headroom in Space
Step 10: Evaluate Landing Requirements
- 12:40–15:25 Understand Landing Code Requirements
- 17:28–23:43 Identify Landing Size Requirements
- 6:03–6:46 Implement Landings
How to Check Your Stairs Against Building Code
This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

