Inspect Commercial Stair Handrails
From How to Check Your Stairs Against Building Code · Step 7 of 10 · Video by Jeremy Booth

Showing 4:07–4:38 of the source video. Watch the full video with every moment.
What happens in this clip
Assess handrails on stairs within commercial buildings and spaces with public access for specific code requirements. Handrails must be present on both sides of the stair. Measure the height from a stair point to the top of the handrail: the minimum height is 34 inches (864mm), and the maximum is 38 inches (965mm). Additionally, the handrail must end above the strike point (as defined in Step 3), and it must extend 12 inches (305mm) horizontally past the top stair point. Utilize your tape measure to confirm all these dimensional and placement requirements.
What's used
Tools
- Tape Measure
About the full video
This guide provides instructions for checking handrails and guardrails against International Building Code standards to ensure safety and compliance in both commercial and residential settings. It covers dimensions, spacing, and placement requirements for various railing types.
What's said in this clip
three or more steps for commercial buildings and spaces with public access handrails must be on both sides of the stair measuring from a stair point to the top of a handrail the minimum Heights is 34 inches and the maximum is 38 inches the handrail must end above the strike point the tape measure can be used to show the location of the strike point to verify the handrail is long enough as it is demonstrated by the picture below the handrail must extend 12 inches horizontally past the top stair point
Automatically transcribed from the source video.
Step 7 of 10: Inspect Handrails
Check that handrails are installed at a height between 34 and 38 inches above the tread nosings. Ensure the handrail is continuous and runs the full length of the stairs. Test for stability by applying firm pressure. The graspable diameter or shape of the handrail should also comply with code (e.g., typically between 1.25 and 2 inches in circumference or cross-sectional dimension).
Every video in How to Check Your Stairs Against Building Code
Step 1: Measure Stair Rise
Step 2: Measure Stair Run
- 0:42–0:56 Measure and Verify Rise and Run
- 0:52–2:34 Measuring Rise and Run
- 2:00–2:24 Analyzing Stairway with Consistent Nosings (Correct Design)
Step 3: Check for Consistent Riser Height
- 0:31–1:01 Measure Riser Height and Tread Depth Consistency
- 4:28–6:49 Maximum Riser and Tread Difference
- 3:09–3:40 Set Riser Height and Consistency
Step 4: Check for Consistent Tread Depth (Run)
Step 5: Inspect Tread Nosing
Step 6: Check Stair Width
- 1:36–2:19 Minimum Stairway Width
- 1:34–2:22 Determine Overall Stair Width
- 0:00–0:40 Understand Minimum Stairway Width
Step 7: Inspect Handrails
- 0:24–0:42 Check Railing Height
- 4:07–4:38 Inspect Commercial Stair Handrails (this video)
- 1:50–2:05 Measure Handrail Height
Step 8: Inspect Balusters and Guardrails
- 5:28–6:08 Check Guardrail Openings
- 0:29–0:58 Measure Baluster Spacing for Code Compliance
- 0:25–0:29 Check Guardrail Opening Size
Step 9: Check Headroom
- 2:19–2:52 Minimum Headroom Height
- 0:40–1:12 Determine Minimum Headroom Height
- 10:28–12:22 Verify Fitment and Headroom in Space
Step 10: Evaluate Landing Requirements
- 12:40–15:25 Understand Landing Code Requirements
- 17:28–23:43 Identify Landing Size Requirements
- 6:03–6:46 Implement Landings
How to Check Your Stairs Against Building Code
This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

