powered by

Understand Minimum Stairway Width

From How to Check Your Stairs Against Building Code · Step 6 of 10 · Video by stairbuilding

Showing 0:00–0:40 of the source video. Watch the full video with every moment.

What happens in this clip

The video begins by introducing the importance of adhering to stair building codes, specifically referencing the 2021 International Residential Code. The first code discussed is the minimum width of a stairway, which must be no less than 36 inches. This measurement is crucial because it applies *after* all finishing materials, such as drywall, wood trim, or baseboard (skirt board), have been installed. Therefore, when framing the walls for a stairway that will be enclosed, it's essential to account for the thickness of these finish materials to ensure the final clear width meets the 36-inch minimum.

About the full video

This video provides a detailed overview of essential building code requirements for wooden stair framing, drawing from the 2021 International Residential Code. It covers critical dimensions such as minimum stairway width, headroom, individual riser height, tread depth, and stair landing depth. Additionally, it clarifies the distinct requirements for clear width in relation to guardrails and grippable handrails, emphasizing the importance of checking local building authorities for specific regulations.

Step 6 of 10: Check Stair Width

Measure the clear width of the stair tread from one handrail or wall to the other. Building codes typically require a minimum stair width of 36 inches for most residential applications to allow for safe passage.

Open this step in the guide

Every video in How to Check Your Stairs Against Building Code

  1. Step 1: Measure Stair Rise

  2. Step 2: Measure Stair Run

  3. Step 3: Check for Consistent Riser Height

  4. Step 4: Check for Consistent Tread Depth (Run)

  5. Step 5: Inspect Tread Nosing

  6. Step 6: Check Stair Width

  7. Step 7: Inspect Handrails

  8. Step 8: Inspect Balusters and Guardrails

  9. Step 9: Check Headroom

  10. Step 10: Evaluate Landing Requirements

How to Check Your Stairs Against Building Code

This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Understand Minimum Stairway Width — How to Check Your Stairs Against Building Code | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.