powered by

Measure and Verify Rise and Run

From How to Check Your Stairs Against Building Code · Step 2 of 10 · Video by Your New House

Showing 0:42–0:56 of the source video. Watch the full video with every moment.

What happens in this clip

According to the Uniform Building Code, the 'rise' (vertical height from the top of one step to the top of the next) should be 8 inches for residential homes. The 'run' (horizontal surface area or tread depth) should be 9 inches. The host uses a tape measure to illustrate these critical dimensions on an unfinished staircase.

Goal: Ensure staircase rise and run adhere to building code standards

What's used

Tools

  • Tape Measure

About the full video

This video provides essential guidelines for constructing residential staircases, focusing on key safety and comfort standards from the Uniform Building Code. It covers proper dimensions for rise and run, handrail height and continuity, baluster spacing, and required headroom, ensuring the staircase is safe, easy to navigate, and meets regulatory requirements.

Step 2 of 10: Measure Stair Run

Measure the horizontal distance from the leading edge of one tread to the leading edge of the next tread. This measurement is the stair run. Ensure that the run is consistent across all steps. Building codes typically require a minimum stair run of 10 inches for residential stairs. The 'tread depth' (the part you step on) is typically measured from the nosing of one step to the nosing of the next. Codes usually specify a minimum tread depth (e.g., 10 inches), and the 'going' (the horizontal distance from one riser to the next) should not exceed the tread depth.

Open this step in the guide

Every video in How to Check Your Stairs Against Building Code

  1. Step 1: Measure Stair Rise

  2. Step 2: Measure Stair Run

  3. Step 3: Check for Consistent Riser Height

  4. Step 4: Check for Consistent Tread Depth (Run)

  5. Step 5: Inspect Tread Nosing

  6. Step 6: Check Stair Width

  7. Step 7: Inspect Handrails

  8. Step 8: Inspect Balusters and Guardrails

  9. Step 9: Check Headroom

  10. Step 10: Evaluate Landing Requirements

How to Check Your Stairs Against Building Code

This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Measure and Verify Rise and Run — How to Check Your Stairs Against Building Code | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.