powered by

Determine Overall Stair Width

From How to Check Your Stairs Against Building Code · Step 6 of 10 · Video by Perkins Builder Brothers

Showing 1:34–2:22 of the source video. Watch the full video with every moment.

What happens in this clip

By code, the overall width of stairs must be a minimum of 36 inches, measured from finished material to finished material, up to a minimum headroom height of 6 feet 8 inches. To accommodate finished materials on each side, it's recommended to frame the stairs at a minimum of 37 inches wide, with 40 inches being an even better option for comfort and ease of finishing. Handrails are allowed to protrude into this space by up to 4.25 inches. An exception exists for stairs not needed for egress (e.g., to a basement with its own exit), which can be as narrow as 26 inches, though this is not generally recommended for comfort.

Goal: Ensure the overall stair width meets code requirements, allowing for finished materials and handrail protrusions.

What's used

Tools

  • Pencil
  • Tape Measure

About the full video

This video provides a comprehensive overview of essential building codes and framing formulas for constructing safe and compliant stairs. It covers critical dimensions such as overall width, headroom, vertical rise, riser height, tread depth, nosing specifications, tread slope, landing requirements, and rules for winder stairs and open risers, emphasizing safety and legal compliance.

What's said in this clip

what it says alright code number one the width of your stairs the width of your stairs by a code has to be 36 inches wide from finished material to finish material up to the minimum height of six foot eight okay so you have to frame your stairs wider than that so that you have room for your finished material on each side I'd say 37 inches minimum on the framing we like to go about forty if we can now the handrail is allowed to protrude into that space four and a quarter inches maximum and there is one weird exception here is that if your stairs are not needed for egress that means they're not needed as an exit you can go as little as 26 inches now I've never done this and I wouldn't really recommend it but if you just had to get to a basement or something like that that had its own egress down there you could go with that narrower 26 with code number two the height of your

Automatically transcribed from the source video.

Step 6 of 10: Check Stair Width

Measure the clear width of the stair tread from one handrail or wall to the other. Building codes typically require a minimum stair width of 36 inches for most residential applications to allow for safe passage.

Open this step in the guide

Every video in How to Check Your Stairs Against Building Code

  1. Step 1: Measure Stair Rise

  2. Step 2: Measure Stair Run

  3. Step 3: Check for Consistent Riser Height

  4. Step 4: Check for Consistent Tread Depth (Run)

  5. Step 5: Inspect Tread Nosing

  6. Step 6: Check Stair Width

  7. Step 7: Inspect Handrails

  8. Step 8: Inspect Balusters and Guardrails

  9. Step 9: Check Headroom

  10. Step 10: Evaluate Landing Requirements

Questions about How to Check Your Stairs Against Building Code

Why do I need both a dial caliper and a pocket caliper, and what are they used for?

These specialized tools are crucial for precise measurements of small details like tread nosing projection and baluster spacing, which often have tight code tolerances. While a tape measure handles overall dimensions, calipers ensure the accuracy needed for these critical, smaller elements to confirm compliance.

What safety precautions should I take while inspecting my stairs?

Ensure the staircase is well-lit to clearly see all features and potential hazards. Be cautious if treads feel loose, handrails are wobbly, or if there are any obvious signs of structural instability. Do not attempt repairs during inspection; simply identify issues.

Is the 4-hour estimate realistic for a beginner, or could this project take longer?

The 4-hour estimate is a general guideline for an average straight staircase. If you have multiple flights, complex turns, or find yourself needing to re-measure for accuracy, it could take longer. Take your time to ensure all measurements are precise.

What are the most common building code violations people overlook when checking stairs?

Many people miss inconsistencies in riser height or tread depth, even by small fractions, which are significant tripping hazards. Other common issues include improper handrail height or grip, baluster spacing wider than 4 inches, and insufficient headroom clearance.

What should I do if my existing stairs don't meet current building codes?

Document all identified violations with measurements and photos. Prioritize immediate safety hazards. For significant issues, consult with a licensed contractor or your local building department to understand the necessary steps and potential costs for bringing your stairs up to code.

How to Check Your Stairs Against Building Code

This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Determine Overall Stair Width — How to Check Your Stairs Against Building Code | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.