Check Guardrail Opening Size
From How to Check Your Stairs Against Building Code · Step 8 of 10 · Video by PPG

Showing 0:25–0:29 of the source video. Watch the full video with every moment.
What happens in this clip
Examine the spacing between the balusters or pickets in the guardrail. No opening in the guardrail should be larger than four inches. This is a critical safety standard to prevent small children or pets from falling through or getting stuck.
Goal: Ensure guardrail openings are safe and meet code requirements.
What's used
Tools
- Guardrail
About the full video
This video provides essential tips and a checklist for what to look for when having a deck built, focusing on safety, structural integrity, and adherence to common building practices. It covers guardrail specifications, post dimensions and installation, bracing, and proper attachment to the house.
Step 8 of 10: Inspect Balusters and Guardrails
Measure the clear space between balusters (spindles) to ensure no object larger than 4 inches can pass through. This prevents children from getting stuck. Inspect guardrails (if present) for stability and ensure they meet the required height (typically 36 inches on open sides of stairs and landings).
Every video in How to Check Your Stairs Against Building Code
Step 1: Measure Stair Rise
Step 2: Measure Stair Run
- 0:42–0:56 Measure and Verify Rise and Run
- 0:52–2:34 Measuring Rise and Run
- 2:00–2:24 Analyzing Stairway with Consistent Nosings (Correct Design)
Step 3: Check for Consistent Riser Height
- 0:31–1:01 Measure Riser Height and Tread Depth Consistency
- 4:28–6:49 Maximum Riser and Tread Difference
- 3:09–3:40 Set Riser Height and Consistency
Step 4: Check for Consistent Tread Depth (Run)
Step 5: Inspect Tread Nosing
Step 6: Check Stair Width
- 1:36–2:19 Minimum Stairway Width
- 1:34–2:22 Determine Overall Stair Width
- 0:00–0:40 Understand Minimum Stairway Width
Step 7: Inspect Handrails
- 0:24–0:42 Check Railing Height
- 4:07–4:38 Inspect Commercial Stair Handrails
- 1:50–2:05 Measure Handrail Height
Step 8: Inspect Balusters and Guardrails
- 5:28–6:08 Check Guardrail Openings
- 0:29–0:58 Measure Baluster Spacing for Code Compliance
- 0:25–0:29 Check Guardrail Opening Size (this video)
Step 9: Check Headroom
- 2:19–2:52 Minimum Headroom Height
- 0:40–1:12 Determine Minimum Headroom Height
- 10:28–12:22 Verify Fitment and Headroom in Space
Step 10: Evaluate Landing Requirements
- 12:40–15:25 Understand Landing Code Requirements
- 17:28–23:43 Identify Landing Size Requirements
- 6:03–6:46 Implement Landings
How to Check Your Stairs Against Building Code
This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

