Measure Baluster Spacing for Code Compliance
From How to Check Your Stairs Against Building Code · Step 8 of 10 · Video by International Association of Certified Home Inspectors (InterNACHI)

Showing 0:29–0:58 of the source video. Watch the full video with every moment.
What happens in this clip
Visually inspect and, if necessary, use a measuring tape to check the distance between adjacent balusters. The inspector points out that the spacing in the demonstrated railing is greater than 4 inches, which is a common deficiency in older decks. Modern safety standards require that a 4-inch sphere cannot pass through any opening in the guardrail, including between balusters, to prevent a small child from falling through or getting stuck. This non-compliance indicates a need for immediate corrective action, which could involve adding additional balusters or reinforcements.
Goal: Finally, examine the spacing between the balusters to ensure it meets current safety codes, which typically require gaps to be less than 4 inches to prevent small children from falling through.
What's used
Tools
- Measuring Tape
About the full video
This video demonstrates how to inspect a deck railing for common safety deficiencies and code non-compliance, highlighting issues that would necessitate repair, potentially using metal reinforcements to improve stability and durability. The inspector checks the railing's resistance to outward force, the security of individual balusters, and the spacing between balusters against current safety standards.
What's said in this clip
space in between the spindles is more than 4 in apart. That's large enough for a small child to fall through the guard. The guard is supposed to prevent you from falling off. But, we know now that this house was built to code back then, but modern standards require the vertical spindles to have smaller spaces in between, so that small kids don't fall out. That's a guard. Prevents you from falling.
Automatically transcribed from the source video.
Step 8 of 10: Inspect Balusters and Guardrails
Measure the clear space between balusters (spindles) to ensure no object larger than 4 inches can pass through. This prevents children from getting stuck. Inspect guardrails (if present) for stability and ensure they meet the required height (typically 36 inches on open sides of stairs and landings).
Every video in How to Check Your Stairs Against Building Code
Step 1: Measure Stair Rise
Step 2: Measure Stair Run
- 0:42–0:56 Measure and Verify Rise and Run
- 0:52–2:34 Measuring Rise and Run
- 2:00–2:24 Analyzing Stairway with Consistent Nosings (Correct Design)
Step 3: Check for Consistent Riser Height
- 0:31–1:01 Measure Riser Height and Tread Depth Consistency
- 4:28–6:49 Maximum Riser and Tread Difference
- 3:09–3:40 Set Riser Height and Consistency
Step 4: Check for Consistent Tread Depth (Run)
Step 5: Inspect Tread Nosing
Step 6: Check Stair Width
- 1:36–2:19 Minimum Stairway Width
- 1:34–2:22 Determine Overall Stair Width
- 0:00–0:40 Understand Minimum Stairway Width
Step 7: Inspect Handrails
- 0:24–0:42 Check Railing Height
- 4:07–4:38 Inspect Commercial Stair Handrails
- 1:50–2:05 Measure Handrail Height
Step 8: Inspect Balusters and Guardrails
- 5:28–6:08 Check Guardrail Openings
- 0:29–0:58 Measure Baluster Spacing for Code Compliance (this video)
- 0:25–0:29 Check Guardrail Opening Size
Step 9: Check Headroom
- 2:19–2:52 Minimum Headroom Height
- 0:40–1:12 Determine Minimum Headroom Height
- 10:28–12:22 Verify Fitment and Headroom in Space
Step 10: Evaluate Landing Requirements
- 12:40–15:25 Understand Landing Code Requirements
- 17:28–23:43 Identify Landing Size Requirements
- 6:03–6:46 Implement Landings
How to Check Your Stairs Against Building Code
This project outlines the process for a DIYer to check their existing stairs against common building code requirements. It involves understanding key measurements and features of stairs and comparing them to established standards. The goal is to identify any potential safety issues or code violations.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

