powered by

Stain Stair Treads

From How to Cover Waterfall-Style Stairs with Treads · Step 9 of 9 · Video by Toya Designs

Showing 1:18–1:37 of the source video. Watch the full video with every moment.

What happens in this clip

After sanding, apply wood stain to the stair treads. The video uses Minwax Wood Finish Penetrating Stain in 'Classic Gray 271'. Apply the stain with a brush or rag, ensuring even coverage. Allow the stain to penetrate, then wipe off any excess according to the product's instructions. Similar to sanding, the video shows staining every other stair to maintain access while working. Allow proper drying time before proceeding.

Goal: Apply a wood stain to the treads to achieve the desired color.

What's used

Tools

  • Minwax Wood Finish Penetrating Stain Classic Gray 271 Minwax
  • Gel stain
  • Paintbrush

About the full video

This project details a budget-friendly stair renovation, transforming carpeted stairs into stylish wooden stairs with stained treads and beadboard risers. The process involves removing old carpet, stripping paint, sanding wood, applying wood stain, installing beadboard panels, applying polyurethane sealant, laying new landing boards, and finishing with trim and paint. The entire project was completed for approximately $80.

What's said in this clip

These are sanded. So, that I can go up and down the stairs, I stained every other stair. I am liking how this turn is turning out. And I used the classic uh color. Classic gray.

Automatically transcribed from the source video.

Step 9 of 9: Apply Finish to Treads

If staining, apply the chosen stain evenly to the new treads, following the product's instructions. Wipe off excess stain after the recommended time. Allow the stain to dry completely. Once dry, apply multiple coats of a durable polyurethane or other suitable clear finish. Apply thin, even coats, allowing adequate drying time between each. Lightly sand with very fine-grit sandpaper (e.g., 320-400 grit) between coats for a smoother finish, and wipe away dust with a tack cloth after each sanding. Pay special attention to sealing the edges and the waterfall overhang.

Open this step in the guide

Every video in How to Cover Waterfall-Style Stairs with Treads

  1. Step 1: Inspect Existing Treads and Risers

  2. Step 2: Measure and Template for New Treads

  3. Step 3: Cut New Treads

  4. Step 4: Prepare Existing Surfaces

  5. Step 5: Dry Fit New Treads

  6. Step 6: Apply Adhesive and Fasteners

  7. Step 7: Install Waterfall Risers/Returns (if applicable)

  8. Step 8: Fill and Sand Fastener Holes

  9. Step 9: Apply Finish to Treads

Questions about How to Cover Waterfall-Style Stairs with Treads

What are the biggest challenges in achieving precise cuts for waterfall stair treads, and how can I avoid common measuring mistakes?

Precision in templating each step is critical as stairs are rarely perfectly uniform. Use a sturdy template material like cardboard or MDF, marking both the tread length and any angle variations. Always double-check measurements and consider cutting slightly oversized, then trimming for a perfect fit.

Beyond basic measuring tools, what specialized tools are essential for cutting the new treads accurately for a waterfall style?

A high-quality circular saw with a fine-tooth blade is crucial for clean cuts. A speed square or a protractor will help transfer angles accurately from your templates. Clamps are also vital for securing your workpieces and straight-edge guides for precise cuts.

How challenging is this project for someone with intermediate DIY skills, and is the 4-day estimate realistic?

The 'intermediate' rating is fair due to the need for precise measurements, cuts, and the repetitive nature for each step. The 4-day estimate is achievable but can easily extend if you encounter uneven stairs, need extra time for templating, or if adhesive/finish drying times are long. Patience is key.

How important is the preparation of the existing stair surfaces, and what are the key steps before installing new treads?

Thorough surface preparation is extremely important for a lasting installation. Ensure existing treads and risers are clean, dry, and free of loose debris or old adhesive. Any major imperfections should be sanded level or filled, providing a solid, stable base for the new treads to adhere to.

What are the most critical safety precautions I should take when working on this stair renovation project?

Always wear appropriate personal protective equipment, including safety glasses and hearing protection, especially when using power tools like a circular saw. Ensure your work area is well-lit and clear of trip hazards. When applying adhesives or finishes, ensure good ventilation to avoid inhaling fumes.

What exactly are 'waterfall risers/returns' and when might I need to install them for this project?

Waterfall stairs typically have an open side where the tread extends past the stringer. 'Returns' are often strips of matching wood that cap the exposed end grain of the new tread, creating a finished, polished look. You'll need them if your new treads fully cover the existing ones and you want to maintain or create this specific aesthetic where the tread wraps around the open side.

How to Cover Waterfall-Style Stairs with Treads

This project outlines the process of covering waterfall-style stairs with new treads. Waterfall stairs have treads that extend beyond the riser, creating an open side. This project focuses on installing new treads over existing ones, potentially for aesthetic updates or to repair worn surfaces.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Stain Stair Treads — How to Cover Waterfall-Style Stairs with Treads | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.