Sand & Prepare Stair Surfaces
From How to Cover Waterfall-Style Stairs with Treads · Step 4 of 9 · Video by Family Handyman

Showing 0:12–0:18 of the source video. Watch the full video with every moment.
What happens in this clip
After removing the carpet, sand down the existing wooden treads and risers to remove any remaining adhesive, carpet fibers, or imperfections. Use a sanding block or orbital sander for this process. Once sanded smooth, apply white paint to the risers using a roller for a clean, contrasting look.
Goal: Thoroughly sand the exposed wooden stair components to remove old adhesive and smooth the surface, then paint the risers white.
What's used
Tools
- Orbital Sander
- Paint Roller
- Paint Tray
- Sanding Block
Materials
- Sandpaper
- White Paint Valspar 2000
About the full video
This project guides you through renovating carpeted stairs into a modern look with stained wooden treads and painted white risers. It covers removing old carpet, preparing the existing structure, cutting and staining new wood treads, installing them, and reinstalling the railing for a complete transformation.
Step 4 of 9: Prepare Existing Surfaces
Clean the existing treads and risers to remove all dust, dirt, grease, and debris. If there are any small holes or imperfections, fill them with wood filler or epoxy and allow them to dry completely. Lightly sand any high spots or uneven areas on the existing surfaces to create a smooth plane. If the existing treads have a slippery finish, lightly scuff-sanding them can provide better adhesion for any adhesive used.
Every video in How to Cover Waterfall-Style Stairs with Treads
Step 1: Inspect Existing Treads and Risers
- 0:04–1:28 Assess Existing Staircase & Components
- 0:00–0:13 Assess Existing Stairs and Planning
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
Step 2: Measure and Template for New Treads
- 0:41–1:06 Measure and Mark Treads
- 0:55–1:05 Measure and Cut First Tread
- 0:18–0:49 Measure Stair Tread and Riser
Step 3: Cut New Treads
- 4:34–5:55 Measure and Cut Treads
- 0:43–0:52 Measure and Cut New Treads
- 7:06–9:20 Mark & Cut New Treads/Risers
Step 4: Prepare Existing Surfaces
- 7:20–7:47 Prepare Existing Stairs for Installation
- 1:40–2:44 Prepare Surface by Filling Holes
- 0:12–0:18 Sand & Prepare Stair Surfaces (this video)
Step 5: Dry Fit New Treads
- 19:07–19:52 Dry-Fit and Test Treads
- 1:46–2:21 Install First Tread
- 6:45–8:03 Install New Treads and Secure with Shims/Glue/Nails
Step 6: Apply Adhesive and Fasteners
- 2:32–3:28 Install First Tread and Riser
- 3:28–6:52 Install Remaining Treads and Risers
- 9:53 Install New Treads
Step 7: Install Waterfall Risers/Returns (if applicable)
- 15:24–19:11 Install Risers and Treads
- 1:04–1:15 Install Risers (Counter Stairs)
- 12:53–14:48 Addressing Exposed Staircase Ends
Step 8: Fill and Sand Fastener Holes
- 4:25–4:47 Fill Gaps and Nail Holes
- 3:59–4:48 Apply Wood Filler and Sand
- 6:57–8:12 Fill and Sand Wood Surfaces
Step 9: Apply Finish to Treads
- 1:18–1:37 Stain Stair Treads
- 0:39–0:43 Stain New Treads
- 6:17–7:17 Stain and Seal Treads
How to Cover Waterfall-Style Stairs with Treads
This project outlines the process of covering waterfall-style stairs with new treads. Waterfall stairs have treads that extend beyond the riser, creating an open side. This project focuses on installing new treads over existing ones, potentially for aesthetic updates or to repair worn surfaces.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

