powered by

Install Risers and Treads

From How to Cover Waterfall-Style Stairs with Treads · Step 7 of 9 · Video by Perkins Builder Brothers

Showing 15:24–19:11 of the source video. Watch the full video with every moment.

What happens in this clip

The installation of the risers begins, securing them with both construction adhesive and finish nails to prevent any future squeaking or movement. This ensures a solid connection between the vertical riser and the structural elements. After the risers are installed, the treads are carefully fitted. A unique method is used where a single tread is cut square and used as a gauge to check the fit against the newly installed skirt boards. This allows for identifying any areas where the skirt board might need slight adjustment (e.g., adding a 1/16th or 3/32nd inch) to accommodate a perfect fit for each tread. The treads are then installed, again using construction adhesive and finish nails. This step deviates from traditional lapped joints by relying on precise cuts and strong adhesion for a flush, tight fit rather than interlocking wood joinery for primary structural support, as the structural stringers already provide that. The video notes that traditional staircases often used notches and wedges for integral strength, which this modern approach replaces with framing and finishing materials.

Goal: The yellow pine risers and treads are installed using a combination of construction adhesive and finish nails, ensuring a solid, squeak-free staircase assembly.

What's used

Tools

  • Construction Adhesive
  • Finish Nailer (Paslode)
  • Pencil

Materials

  • Finish Nails
  • Yellow Pine Risers
  • Yellow Pine Treads

About the full video

This video details the process of constructing a wooden staircase, focusing on precision fitting of risers and treads, and addressing challenges like mismatched heights. It highlights techniques for creating precise patterns for skirt boards and discusses the benefits of using a combination of adhesive and fasteners for a sturdy, squeak-free staircase. The video also touches upon the historical context of lapped joints in staircase construction versus modern methods.

Step 7 of 9: Install Waterfall Risers/Returns (if applicable)

For waterfall stairs, you may have a separate piece that covers the exposed edge of the tread where it extends beyond the riser. This is often called a return. Measure and cut these return pieces to precisely fit the dimensions of the tread's overhang and the adjacent riser. Apply construction adhesive to the back of the return piece and secure it to the tread and any adjoining surfaces. You may also need to fasten these with brad nails or a routered dado for a stronger connection. Ensure the joints are tight and flush.

Open this step in the guide

Every video in How to Cover Waterfall-Style Stairs with Treads

  1. Step 1: Inspect Existing Treads and Risers

  2. Step 2: Measure and Template for New Treads

  3. Step 3: Cut New Treads

  4. Step 4: Prepare Existing Surfaces

  5. Step 5: Dry Fit New Treads

  6. Step 6: Apply Adhesive and Fasteners

  7. Step 7: Install Waterfall Risers/Returns (if applicable)

  8. Step 8: Fill and Sand Fastener Holes

  9. Step 9: Apply Finish to Treads

How to Cover Waterfall-Style Stairs with Treads

This project outlines the process of covering waterfall-style stairs with new treads. Waterfall stairs have treads that extend beyond the riser, creating an open side. This project focuses on installing new treads over existing ones, potentially for aesthetic updates or to repair worn surfaces.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install Risers and Treads — How to Cover Waterfall-Style Stairs with Treads | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.