Measure and Cut New Treads
From How to Cover Waterfall-Style Stairs with Treads · Step 3 of 9 · Video by soyourerenovating

Showing 0:43–0:52 of the source video. Watch the full video with every moment.
What happens in this clip
Measure each stair tread individually from front to back and side to side, as stairs are rarely perfectly uniform. Cut the new hardwood treads to the precise dimensions of each step. Double-check all measurements before making cuts to ensure accuracy.
Goal: Prepare new hardwood treads to fit each stair.
What's used
Tools
- Pencil
- Safety Glasses
- Saw (e.g.
- Miter Saw
- Table Saw
- Jigsaw)
- Tape Measure
Materials
- New Wooden Treads
About the full video
This DIY project guides you through completely renovating old carpeted stairs by removing the old carpet, cutting off existing bullnoses, securing loose stairs, installing new hardwood treads and risers, and finally staining them for a polished look.
Step 3 of 9: Cut New Treads
Transfer the dimensions or template outlines onto your new tread material (e.g., hardwood, engineered wood). Using a circular saw or jigsaw, carefully cut out each tread. Ensure all cuts are straight and accurate, especially for the edges that will meet risers or other treads, and the waterfall overhang. If cutting hardwood, consider using a fine-tooth blade to minimize tear-out and achieve a cleaner edge.
Every video in How to Cover Waterfall-Style Stairs with Treads
Step 1: Inspect Existing Treads and Risers
- 0:04–1:28 Assess Existing Staircase & Components
- 0:00–0:13 Assess Existing Stairs and Planning
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
Step 2: Measure and Template for New Treads
- 0:41–1:06 Measure and Mark Treads
- 0:55–1:05 Measure and Cut First Tread
- 0:18–0:49 Measure Stair Tread and Riser
Step 3: Cut New Treads
- 4:34–5:55 Measure and Cut Treads
- 0:43–0:52 Measure and Cut New Treads (this video)
- 7:06–9:20 Mark & Cut New Treads/Risers
Step 4: Prepare Existing Surfaces
- 7:20–7:47 Prepare Existing Stairs for Installation
- 1:40–2:44 Prepare Surface by Filling Holes
- 0:12–0:18 Sand & Prepare Stair Surfaces
Step 5: Dry Fit New Treads
- 19:07–19:52 Dry-Fit and Test Treads
- 1:46–2:21 Install First Tread
- 6:45–8:03 Install New Treads and Secure with Shims/Glue/Nails
Step 6: Apply Adhesive and Fasteners
- 2:32–3:28 Install First Tread and Riser
- 3:28–6:52 Install Remaining Treads and Risers
- 9:53 Install New Treads
Step 7: Install Waterfall Risers/Returns (if applicable)
- 15:24–19:11 Install Risers and Treads
- 1:04–1:15 Install Risers (Counter Stairs)
- 12:53–14:48 Addressing Exposed Staircase Ends
Step 8: Fill and Sand Fastener Holes
- 4:25–4:47 Fill Gaps and Nail Holes
- 3:59–4:48 Apply Wood Filler and Sand
- 6:57–8:12 Fill and Sand Wood Surfaces
Step 9: Apply Finish to Treads
- 1:18–1:37 Stain Stair Treads
- 0:39–0:43 Stain New Treads
- 6:17–7:17 Stain and Seal Treads
How to Cover Waterfall-Style Stairs with Treads
This project outlines the process of covering waterfall-style stairs with new treads. Waterfall stairs have treads that extend beyond the riser, creating an open side. This project focuses on installing new treads over existing ones, potentially for aesthetic updates or to repair worn surfaces.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

