powered by

Assess Existing Staircase & Components

From How to Cover Waterfall-Style Stairs with Treads · Step 1 of 9 · Video by This Old House

Showing 0:04–1:28 of the source video. Watch the full video with every moment.

What happens in this clip

The first step involves a comprehensive assessment of the current staircase. Observe any visible cracks in the treads, listen for squeaks or noises when pressure is applied, and check for any looseness in the individual stair components. Identify the riser (vertical board), tread (horizontal board you step on), skirt board (trim along the wall), and stringers (structural supports underneath). Note that the original stairs have an oil-based polyurethane finish, which has ambered over time, and feature a scotia molding underneath the nosing of each tread that hides the gap where the tread meets the riser. Understanding these components and their current condition is crucial before beginning any demolition or replacement work.

Goal: Begin by thoroughly inspecting the existing staircase to identify common problems such as cracked, noisy, or loose treads, and to understand the different structural and finishing components like risers, treads, skirt boards, and stringers.

About the full video

This video provides detailed instructions on how to update an old, noisy, and discolored oak staircase by replacing the worn treads and resurfacing the risers. The process involves carefully disassembling the existing stairs, preparing the structural components, custom-cutting new oak treads to fit irregular spaces, and applying an oak veneer to the risers for a refreshed, modern look. The project focuses on improving aesthetics, reducing noise, and extending the lifespan of the staircase.

Step 1 of 9: Inspect Existing Treads and Risers

Carefully examine each existing stair tread and riser. Look for any signs of damage such as cracks, splits, or deep gouges. Check if any treads or risers are loose, squeaky, or wobbly. Identify any areas of rot, water damage, or delamination, particularly on the edges and undersides. Note any areas that appear uneven or out of level, as these will need to be addressed before new treads are installed.

Open this step in the guide

Every video in How to Cover Waterfall-Style Stairs with Treads

  1. Step 1: Inspect Existing Treads and Risers

  2. Step 2: Measure and Template for New Treads

  3. Step 3: Cut New Treads

  4. Step 4: Prepare Existing Surfaces

  5. Step 5: Dry Fit New Treads

  6. Step 6: Apply Adhesive and Fasteners

  7. Step 7: Install Waterfall Risers/Returns (if applicable)

  8. Step 8: Fill and Sand Fastener Holes

  9. Step 9: Apply Finish to Treads

How to Cover Waterfall-Style Stairs with Treads

This project outlines the process of covering waterfall-style stairs with new treads. Waterfall stairs have treads that extend beyond the riser, creating an open side. This project focuses on installing new treads over existing ones, potentially for aesthetic updates or to repair worn surfaces.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Assess Existing Staircase & Components — How to Cover Waterfall-Style Stairs with Treads | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.