powered by

Measure Stair Tread and Riser

From How to Cover Waterfall-Style Stairs with Treads · Step 2 of 9 · Video by stairbuilding

Showing 0:18–0:49 of the source video. Watch the full video with every moment.

What happens in this clip

Begin by accurately measuring the overall width of your existing stair tread. For the example, a 10-inch tread is used. Next, measure the distance from the center of the first step to the inside of the riser. This specific measurement will be needed if you intend to use the width of the riser for the strips to be installed later. These measurements are crucial for creating precise templates.

Goal: Gather necessary dimensions for templating

What's used

Tools

  • Measuring tape

About the full video

This project provides detailed instructions on how to install a round tread on the first step of an existing stairway. It involves creating custom half-circle templates, assembling layered wood pieces for the tread, securing a support block, and then attaching curved wood strips to form the riser around the new rounded step.

What's said in this clip

you're going to want to do will be to measure the overall width of the stair tread and in our example here we're going to be using a 10 inch tread and you don't need to draw any of this stuff out here unless you feel it's going to be necessary and we're also going to need a measurement from the center to the inside of the riser and this will only be necessary if you're going to use the width of the riser for the strips we're going to be installing here in a

Automatically transcribed from the source video.

Step 2 of 9: Measure and Template for New Treads

Measure the length, width, and depth of each existing tread. For waterfall treads, pay close attention to the overhang measurement. If the treads are not perfectly rectangular or if there are intricate angles, create cardboard templates for each tread. Ensure the templates accurately capture the shape of the existing tread, including the return edge where it meets the riser and the overhang on the open side. Label each template clearly with its corresponding stair location (e.g., 'Tread 1 - Left', 'Tread 2 - Right').

Open this step in the guide

Every video in How to Cover Waterfall-Style Stairs with Treads

  1. Step 1: Inspect Existing Treads and Risers

  2. Step 2: Measure and Template for New Treads

  3. Step 3: Cut New Treads

  4. Step 4: Prepare Existing Surfaces

  5. Step 5: Dry Fit New Treads

  6. Step 6: Apply Adhesive and Fasteners

  7. Step 7: Install Waterfall Risers/Returns (if applicable)

  8. Step 8: Fill and Sand Fastener Holes

  9. Step 9: Apply Finish to Treads

Questions about How to Cover Waterfall-Style Stairs with Treads

What are the biggest challenges in achieving precise cuts for waterfall stair treads, and how can I avoid common measuring mistakes?

Precision in templating each step is critical as stairs are rarely perfectly uniform. Use a sturdy template material like cardboard or MDF, marking both the tread length and any angle variations. Always double-check measurements and consider cutting slightly oversized, then trimming for a perfect fit.

Beyond basic measuring tools, what specialized tools are essential for cutting the new treads accurately for a waterfall style?

A high-quality circular saw with a fine-tooth blade is crucial for clean cuts. A speed square or a protractor will help transfer angles accurately from your templates. Clamps are also vital for securing your workpieces and straight-edge guides for precise cuts.

How challenging is this project for someone with intermediate DIY skills, and is the 4-day estimate realistic?

The 'intermediate' rating is fair due to the need for precise measurements, cuts, and the repetitive nature for each step. The 4-day estimate is achievable but can easily extend if you encounter uneven stairs, need extra time for templating, or if adhesive/finish drying times are long. Patience is key.

How important is the preparation of the existing stair surfaces, and what are the key steps before installing new treads?

Thorough surface preparation is extremely important for a lasting installation. Ensure existing treads and risers are clean, dry, and free of loose debris or old adhesive. Any major imperfections should be sanded level or filled, providing a solid, stable base for the new treads to adhere to.

What are the most critical safety precautions I should take when working on this stair renovation project?

Always wear appropriate personal protective equipment, including safety glasses and hearing protection, especially when using power tools like a circular saw. Ensure your work area is well-lit and clear of trip hazards. When applying adhesives or finishes, ensure good ventilation to avoid inhaling fumes.

What exactly are 'waterfall risers/returns' and when might I need to install them for this project?

Waterfall stairs typically have an open side where the tread extends past the stringer. 'Returns' are often strips of matching wood that cap the exposed end grain of the new tread, creating a finished, polished look. You'll need them if your new treads fully cover the existing ones and you want to maintain or create this specific aesthetic where the tread wraps around the open side.

How to Cover Waterfall-Style Stairs with Treads

This project outlines the process of covering waterfall-style stairs with new treads. Waterfall stairs have treads that extend beyond the riser, creating an open side. This project focuses on installing new treads over existing ones, potentially for aesthetic updates or to repair worn surfaces.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Measure Stair Tread and Riser — How to Cover Waterfall-Style Stairs with Treads | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.