Fill Gaps and Nail Holes
From How to Cover Waterfall-Style Stairs with Treads · Step 8 of 9 · Video by Dani Lyn Design

Showing 4:25–4:47 of the source video. Watch the full video with every moment.
What happens in this clip
After securing the new stair treads, use wood filler to address any imperfections. Apply wood filler to fill any gaps visible on the sides of the treads where they meet the stringers or walls. For these areas, a small metal putty knife is ideal for precise application and smoothing. For the nail holes created by the nail gun, you can simply use your finger to apply and smooth the wood filler, as it allows for better control in small depressions.
Goal: Create a smooth and seamless surface by filling gaps and nail holes on the installed treads.
What's used
Tools
- Small Metal Putty Knife Anvil
- Wood Filler
- Spackle (for painted finishes)
About the full video
This DIY project provides detailed instructions on how to replace old, worn-out stair treads with new ones. The process covers everything from initial assessment and removal of existing treads to precise measurement, cutting, secure installation using adhesive and a nail gun, and finally, filling and sanding imperfections in preparation for staining.
What's said in this clip
once your stairs are secured you're going to want to take a wood filler and fill in any of the gaps on the side of the stairs as well as any of the nail holes that you've created I used a small metal putty knife in order to do the sides that way it allowed me to get in there and get super precise but for the nail holes I just used my finger
Automatically transcribed from the source video.
Step 8 of 9: Fill and Sand Fastener Holes
Using a putty knife, fill all pre-drilled screw holes and nail holes with a color-matched wood filler or a universal wood filler that can be stained. Allow the filler to dry completely according to the manufacturer's instructions. Once dry, lightly sand the filled areas until they are flush and smooth with the surrounding tread surface. Then, sand the entire surface of all newly installed treads to ensure a uniform smoothness, paying attention to edges and any rough spots. Feather sand any areas where new treads meet existing ones.
Every video in How to Cover Waterfall-Style Stairs with Treads
Step 1: Inspect Existing Treads and Risers
- 0:04–1:28 Assess Existing Staircase & Components
- 0:00–0:13 Assess Existing Stairs and Planning
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
Step 2: Measure and Template for New Treads
- 0:41–1:06 Measure and Mark Treads
- 0:55–1:05 Measure and Cut First Tread
- 0:18–0:49 Measure Stair Tread and Riser
Step 3: Cut New Treads
- 4:34–5:55 Measure and Cut Treads
- 0:43–0:52 Measure and Cut New Treads
- 7:06–9:20 Mark & Cut New Treads/Risers
Step 4: Prepare Existing Surfaces
- 7:20–7:47 Prepare Existing Stairs for Installation
- 1:40–2:44 Prepare Surface by Filling Holes
- 0:12–0:18 Sand & Prepare Stair Surfaces
Step 5: Dry Fit New Treads
- 19:07–19:52 Dry-Fit and Test Treads
- 1:46–2:21 Install First Tread
- 6:45–8:03 Install New Treads and Secure with Shims/Glue/Nails
Step 6: Apply Adhesive and Fasteners
- 2:32–3:28 Install First Tread and Riser
- 3:28–6:52 Install Remaining Treads and Risers
- 9:53 Install New Treads
Step 7: Install Waterfall Risers/Returns (if applicable)
- 15:24–19:11 Install Risers and Treads
- 1:04–1:15 Install Risers (Counter Stairs)
- 12:53–14:48 Addressing Exposed Staircase Ends
Step 8: Fill and Sand Fastener Holes
- 4:25–4:47 Fill Gaps and Nail Holes (this video)
- 3:59–4:48 Apply Wood Filler and Sand
- 6:57–8:12 Fill and Sand Wood Surfaces
Step 9: Apply Finish to Treads
- 1:18–1:37 Stain Stair Treads
- 0:39–0:43 Stain New Treads
- 6:17–7:17 Stain and Seal Treads
Questions about How to Cover Waterfall-Style Stairs with Treads
What are the biggest challenges in achieving precise cuts for waterfall stair treads, and how can I avoid common measuring mistakes?
Precision in templating each step is critical as stairs are rarely perfectly uniform. Use a sturdy template material like cardboard or MDF, marking both the tread length and any angle variations. Always double-check measurements and consider cutting slightly oversized, then trimming for a perfect fit.
Beyond basic measuring tools, what specialized tools are essential for cutting the new treads accurately for a waterfall style?
A high-quality circular saw with a fine-tooth blade is crucial for clean cuts. A speed square or a protractor will help transfer angles accurately from your templates. Clamps are also vital for securing your workpieces and straight-edge guides for precise cuts.
How challenging is this project for someone with intermediate DIY skills, and is the 4-day estimate realistic?
The 'intermediate' rating is fair due to the need for precise measurements, cuts, and the repetitive nature for each step. The 4-day estimate is achievable but can easily extend if you encounter uneven stairs, need extra time for templating, or if adhesive/finish drying times are long. Patience is key.
How important is the preparation of the existing stair surfaces, and what are the key steps before installing new treads?
Thorough surface preparation is extremely important for a lasting installation. Ensure existing treads and risers are clean, dry, and free of loose debris or old adhesive. Any major imperfections should be sanded level or filled, providing a solid, stable base for the new treads to adhere to.
What are the most critical safety precautions I should take when working on this stair renovation project?
Always wear appropriate personal protective equipment, including safety glasses and hearing protection, especially when using power tools like a circular saw. Ensure your work area is well-lit and clear of trip hazards. When applying adhesives or finishes, ensure good ventilation to avoid inhaling fumes.
What exactly are 'waterfall risers/returns' and when might I need to install them for this project?
Waterfall stairs typically have an open side where the tread extends past the stringer. 'Returns' are often strips of matching wood that cap the exposed end grain of the new tread, creating a finished, polished look. You'll need them if your new treads fully cover the existing ones and you want to maintain or create this specific aesthetic where the tread wraps around the open side.
How to Cover Waterfall-Style Stairs with Treads
This project outlines the process of covering waterfall-style stairs with new treads. Waterfall stairs have treads that extend beyond the riser, creating an open side. This project focuses on installing new treads over existing ones, potentially for aesthetic updates or to repair worn surfaces.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

