Measure and Mark Treads
From How to Cover Waterfall-Style Stairs with Treads · Step 2 of 9 · Video by Refresh Home Improvements

Showing 0:41–1:06 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by accurately measuring the width and depth of each existing stair tread. For precision, especially if not using riser covers, use a tape measure and a pencil to mark the required dimensions on the new vinyl stair treads. A stair tread template tool, which helps measure both the width and angle of both sides of the tread simultaneously, is highly recommended for efficiency and accuracy.
Goal: Obtain accurate dimensions for cutting new treads
What's used
Tools
- DURASTAIR Vinyl Stair Treads DURASTAIR
- Pencil
- Stair Tread Template Tool Unknown (A 16 in model shown)
- Tape Measure
About the full video
This project details how to renovate a staircase by installing new vinyl stair treads over existing ones using DURASTAIR products. The process involves precise measurement and cutting of the vinyl treads, application of adhesive, and careful installation, followed by minor repairs and cleanup to achieve a refreshed look.
Step 2 of 9: Measure and Template for New Treads
Measure the length, width, and depth of each existing tread. For waterfall treads, pay close attention to the overhang measurement. If the treads are not perfectly rectangular or if there are intricate angles, create cardboard templates for each tread. Ensure the templates accurately capture the shape of the existing tread, including the return edge where it meets the riser and the overhang on the open side. Label each template clearly with its corresponding stair location (e.g., 'Tread 1 - Left', 'Tread 2 - Right').
Every video in How to Cover Waterfall-Style Stairs with Treads
Step 1: Inspect Existing Treads and Risers
- 0:04–1:28 Assess Existing Staircase & Components
- 0:00–0:13 Assess Existing Stairs and Planning
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
Step 2: Measure and Template for New Treads
- 0:41–1:06 Measure and Mark Treads (this video)
- 0:55–1:05 Measure and Cut First Tread
- 0:18–0:49 Measure Stair Tread and Riser
Step 3: Cut New Treads
- 4:34–5:55 Measure and Cut Treads
- 0:43–0:52 Measure and Cut New Treads
- 7:06–9:20 Mark & Cut New Treads/Risers
Step 4: Prepare Existing Surfaces
- 7:20–7:47 Prepare Existing Stairs for Installation
- 1:40–2:44 Prepare Surface by Filling Holes
- 0:12–0:18 Sand & Prepare Stair Surfaces
Step 5: Dry Fit New Treads
- 19:07–19:52 Dry-Fit and Test Treads
- 1:46–2:21 Install First Tread
- 6:45–8:03 Install New Treads and Secure with Shims/Glue/Nails
Step 6: Apply Adhesive and Fasteners
- 2:32–3:28 Install First Tread and Riser
- 3:28–6:52 Install Remaining Treads and Risers
- 9:53 Install New Treads
Step 7: Install Waterfall Risers/Returns (if applicable)
- 15:24–19:11 Install Risers and Treads
- 1:04–1:15 Install Risers (Counter Stairs)
- 12:53–14:48 Addressing Exposed Staircase Ends
Step 8: Fill and Sand Fastener Holes
- 4:25–4:47 Fill Gaps and Nail Holes
- 3:59–4:48 Apply Wood Filler and Sand
- 6:57–8:12 Fill and Sand Wood Surfaces
Step 9: Apply Finish to Treads
- 1:18–1:37 Stain Stair Treads
- 0:39–0:43 Stain New Treads
- 6:17–7:17 Stain and Seal Treads
How to Cover Waterfall-Style Stairs with Treads
This project outlines the process of covering waterfall-style stairs with new treads. Waterfall stairs have treads that extend beyond the riser, creating an open side. This project focuses on installing new treads over existing ones, potentially for aesthetic updates or to repair worn surfaces.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

