powered by

Install First Tread

From How to Cover Waterfall-Style Stairs with Treads · Step 5 of 9 · Video by Performance Accessories

Showing 1:46–2:21 of the source video. Watch the full video with every moment.

What happens in this clip

After the riser is installed, it's time for the new stair tread. First, set the pre-cut tread in place without adhesive to ensure a proper dry fit. Once confirmed, remove the tread and apply a thick bead of polyurethane construction adhesive around the entire perimeter of the back of the tread. Then, apply a zigzag pattern of adhesive across the center of the tread for maximum hold. Carefully place the stair tread back into position, ensuring a 1/16 inch expansion gap all around. To secure, nail the tread within a quarter inch of the back edge only, as the next riser will hide these nail holes. If you are not installing optional risers, you will need to use matching wood putty to fill these nail holes later.

Goal: Secure the first stair tread to the existing structure

What's used

Tools

  • Caulking Gun
  • Finish Nailer DeWalt

Materials

  • Finish Nails
  • Performance Accessory Stair Treads Performance Accessories
  • Polyurethane Construction Adhesive Loctite Premium
  • Wood Putty

About the full video

This project provides step-by-step instructions for properly installing performance accessory stair treads and risers. It covers preparation, precise measuring and cutting, adhesive application, securing with a finish nailer, caulking expansion gaps, and installing optional return trim for exposed stair sides. The guide emphasizes the importance of specific adhesive types and proper expansion gaps for a durable and aesthetically pleasing finish.

Step 5 of 9: Dry Fit New Treads

Carefully place each new tread onto its corresponding existing tread. Check for a snug fit against the risers and any adjacent vertical surfaces. Ensure the waterfall overhang is correctly positioned and that the tread sits level. Make any minor adjustments by carefully trimming or sanding edges as needed to achieve a perfect fit. This step is critical to avoid costly mistakes during the adhesive and fastening stage.

Open this step in the guide

Every video in How to Cover Waterfall-Style Stairs with Treads

  1. Step 1: Inspect Existing Treads and Risers

  2. Step 2: Measure and Template for New Treads

  3. Step 3: Cut New Treads

  4. Step 4: Prepare Existing Surfaces

  5. Step 5: Dry Fit New Treads

  6. Step 6: Apply Adhesive and Fasteners

  7. Step 7: Install Waterfall Risers/Returns (if applicable)

  8. Step 8: Fill and Sand Fastener Holes

  9. Step 9: Apply Finish to Treads

How to Cover Waterfall-Style Stairs with Treads

This project outlines the process of covering waterfall-style stairs with new treads. Waterfall stairs have treads that extend beyond the riser, creating an open side. This project focuses on installing new treads over existing ones, potentially for aesthetic updates or to repair worn surfaces.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install First Tread — How to Cover Waterfall-Style Stairs with Treads | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.