Measure and Cut Treads
From How to Cover Waterfall-Style Stairs with Treads · Step 3 of 9 · Video by Excellence Hardwood Flooring

Showing 4:34–5:55 of the source video. Watch the full video with every moment.
What happens in this clip
After the risers are installed, measure the depth and length of each individual stair tread. According to these measurements, cut your new hardwood treads. It's crucial to be accurate, as even small errors can lead to visible gaps. You may need to make slight adjustments to ensure a gap-free fit. A track saw, set at a 5-degree angle as demonstrated, can be particularly useful for making precise, straight cuts.
Goal: Prepare and cut new hardwood treads to fit each step precisely.
What's used
Tools
- Miter Saw Bosch
- Table saw
- Pencil
- Tape Measure
- Track Saw Makita
- long straight cuts on treads.
Materials
- Hardwood Tread Blanks
About the full video
This project transforms a carpeted staircase into a modern hardwood staircase by replacing old carpet, installing new wooden treads and risers, and updating the railing with metal balusters. The process involves extensive demolition, precise measurement and cutting, careful installation of new wooden components, and fitting the new metal balusters.
Step 3 of 9: Cut New Treads
Transfer the dimensions or template outlines onto your new tread material (e.g., hardwood, engineered wood). Using a circular saw or jigsaw, carefully cut out each tread. Ensure all cuts are straight and accurate, especially for the edges that will meet risers or other treads, and the waterfall overhang. If cutting hardwood, consider using a fine-tooth blade to minimize tear-out and achieve a cleaner edge.
Every video in How to Cover Waterfall-Style Stairs with Treads
Step 1: Inspect Existing Treads and Risers
- 0:04–1:28 Assess Existing Staircase & Components
- 0:00–0:13 Assess Existing Stairs and Planning
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
Step 2: Measure and Template for New Treads
- 0:41–1:06 Measure and Mark Treads
- 0:55–1:05 Measure and Cut First Tread
- 0:18–0:49 Measure Stair Tread and Riser
Step 3: Cut New Treads
- 4:34–5:55 Measure and Cut Treads (this video)
- 0:43–0:52 Measure and Cut New Treads
- 7:06–9:20 Mark & Cut New Treads/Risers
Step 4: Prepare Existing Surfaces
- 7:20–7:47 Prepare Existing Stairs for Installation
- 1:40–2:44 Prepare Surface by Filling Holes
- 0:12–0:18 Sand & Prepare Stair Surfaces
Step 5: Dry Fit New Treads
- 19:07–19:52 Dry-Fit and Test Treads
- 1:46–2:21 Install First Tread
- 6:45–8:03 Install New Treads and Secure with Shims/Glue/Nails
Step 6: Apply Adhesive and Fasteners
- 2:32–3:28 Install First Tread and Riser
- 3:28–6:52 Install Remaining Treads and Risers
- 9:53 Install New Treads
Step 7: Install Waterfall Risers/Returns (if applicable)
- 15:24–19:11 Install Risers and Treads
- 1:04–1:15 Install Risers (Counter Stairs)
- 12:53–14:48 Addressing Exposed Staircase Ends
Step 8: Fill and Sand Fastener Holes
- 4:25–4:47 Fill Gaps and Nail Holes
- 3:59–4:48 Apply Wood Filler and Sand
- 6:57–8:12 Fill and Sand Wood Surfaces
Step 9: Apply Finish to Treads
- 1:18–1:37 Stain Stair Treads
- 0:39–0:43 Stain New Treads
- 6:17–7:17 Stain and Seal Treads
How to Cover Waterfall-Style Stairs with Treads
This project outlines the process of covering waterfall-style stairs with new treads. Waterfall stairs have treads that extend beyond the riser, creating an open side. This project focuses on installing new treads over existing ones, potentially for aesthetic updates or to repair worn surfaces.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

