powered by
Clip 1/3
Helpful?

Step 9 · Apply Finish to Treads

If staining, apply the chosen stain evenly to the new treads, following the product's instructions. Wipe off excess stain after the recommended time. Allow the stain to dry completely. Once dry, apply multiple coats of a durable polyurethane or other suitable clear finish. Apply thin, even coats, allowing adequate drying time between each. Lightly sand with very fine-grit sandpaper (e.g., 320-400 grit) between coats for a smoother finish, and wipe away dust with a tack cloth after each sanding. Pay special attention to sealing the edges and the waterfall overhang.

Tools and Materials

Glue Brush or Roller Varathane 8 oz. Special Walnut Classic Wood Interior Stain 339732 Polyurethane (Water Based) THE CLEAN STORE White Shop Towels Cleaning Wipes (500-Pack) (Full Case) 170 FORMICA 4 ft. x 8 ft. Laminate Sheet in Layered White Sand with Premiumfx Scovato Finish 095121234408000 Tack Cloths Painter's Tape

You've reached the last step

Nice work — share this guide or find your next project.

Browse all guides →
Apply Finish to Treads · How to Cover Waterfall-Style Stairs with Treads · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.