powered by
Clip 1/3
Helpful?

Step 8 · Fill and Sand Fastener Holes

Using a putty knife, fill all pre-drilled screw holes and nail holes with a color-matched wood filler or a universal wood filler that can be stained. Allow the filler to dry completely according to the manufacturer's instructions. Once dry, lightly sand the filled areas until they are flush and smooth with the surrounding tread surface. Then, sand the entire surface of all newly installed treads to ensure a uniform smoothness, paying attention to edges and any rough spots. Feather sand any areas where new treads meet existing ones.

Tools and Materials

Putty Knife Orbital Sander Wood Filler or Putty 3M 9 in. x 11 in. 100, 150, 220 Grit Medium, Fine and Very Fine Aluminum Oxide Sand Paper (5 Sheets-Pack) HDX (12-Pack) Cotton Tack Cloths 4.5 sq. ft.
Fill and Sand Fastener Holes · How to Cover Waterfall-Style Stairs with Treads · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.