powered by

Mount Switch and Adjust Settings

From How to Install a Motion-Sensor Light Switch in a Stairway · Step 6 of 8 · Video by Kevin Jones

Showing 2:41–3:07 of the source video. Watch the full video with every moment.

What happens in this clip

After all wires are securely connected and insulated, carefully push the wires back into the electrical box, making sure they are tucked away without undue stress or pinching. Then, the motion sensor switch is mounted into the electrical box using the provided screws. Once the switch is physically secured, the power to the circuit is restored at the breaker panel. With power on, the lights in the gym, which the switch controls, illuminate. The installer then uses a small flathead screwdriver to adjust the sensitivity and timer settings, which are located under small plastic covers on the face of the motion sensor switch, customizing its operation.

Goal: Secure the new switch and configure its operational settings.

What's used

Tools

  • Screwdriver

About the full video

This instructional video provides a step-by-step guide on how to safely replace a standard light switch with a motion sensor light switch using existing wiring. The process includes verifying power, identifying wires, connecting the new switch, securing it, and making final adjustments to its settings, emphasizing safety throughout.

What's said in this clip

I'm securing the switch with the provided screws to the box. I'll then go turn the power back on. See, the lights are on in the gym. And I'm adjusting the sensitivity and the timer adjustment underneath the little plastic cover with a little flathead screwdriver.

Automatically transcribed from the source video.

Step 6 of 8: Mount the Motion Sensor Switch

Gently fold the connected wires back into the electrical box, ensuring they are not pinched. Align the mounting screws on the new motion sensor switch with the corresponding holes in the electrical box. Screw the switch into place until it is snug against the wall.

Open this step in the guide

Every video in How to Install a Motion-Sensor Light Switch in a Stairway

  1. Step 1: Turn Off Power

  2. Step 2: Remove Existing Switch Plate and Switch

  3. Step 3: Identify and Disconnect Wires

  4. Step 4: Connect Motion Sensor Switch - Line and Load

  5. Step 5: Connect Ground Wire

  6. Step 6: Mount the Motion Sensor Switch

  7. Step 7: Install the Cover Plate

  8. Step 8: Restore Power and Test

Questions about How to Install a Motion-Sensor Light Switch in a Stairway

My stairway has two light switches controlling the same light (a 3-way setup). Can I still install this type of motion sensor switch?

Most standard motion sensor light switches, like the Leviton Decora model listed, are designed for single-pole applications (one switch controlling one light). For a 3-way setup, you would need a specialized 3-way compatible motion sensor switch, which may involve different wiring or require professional installation.

Is the 2-hour estimated time realistic for a beginner, and what factors might make it take longer?

The 2-hour estimate is generally realistic for a beginner if the existing wiring is straightforward and you follow the instructions carefully. However, encountering older, unfamiliar wiring, needing to do extra troubleshooting, or simply being new to electrical work can extend the time. Patience and double-checking each step are crucial.

How do I choose the best motion sensor light switch for a stairway to ensure reliable detection?

For a stairway, look for a motion sensor switch with a wide detection angle and adjustable sensitivity to reliably cover the entire area, including both the top and bottom. Consider models with adjustable 'on' times and an ambient light sensor to prevent unnecessary activation during daylight hours, saving energy.

How to Install a Motion-Sensor Light Switch in a Stairway

This project outlines the steps for installing a motion sensor light switch to automate lighting in a stairway. It covers preparation, wiring, mounting, and testing the new switch.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Mount Switch and Adjust Settings — How to Install a Motion-Sensor Light Switch in a Stairway | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.