powered by

Connect Ground Wires

From How to Install a Motion-Sensor Light Switch in a Stairway · Step 5 of 8 · Video by How To Home

Showing 3:28–3:58 of the source video. Watch the full video with every moment.

What happens in this clip

Take the bare copper ground wire coming from the wall box and the silver-looking ground wire from the motion sensor switch. Twist these two wires together firmly. Once twisted, secure them tightly with a yellow wire nut. Ensure the connection is snug by gently tugging on the wires.

Goal: Establish a safe ground connection for the new switch.

What's used

Materials

  • Wire Nut

About the full video

This video provides step-by-step instructions on how to install a motion sensor light switch. The project aims to save electricity by automatically turning lights off when a room is vacant and offers the convenience of automatic light activation upon entry. The installation process covers disconnecting the old switch, understanding the new motion sensor switch's wiring, connecting ground, neutral, and hot wires, securely mounting the new switch, and finally programming its timeout and sensor sensitivity settings.

What's said in this clip

the ground wire okay so now that we've got all of our wires straightened out let's go ahead and start with installing the ground wires on this switch so you're just going to take your ground wire coming off the switch and start wrapping it around that ground wire coming out of the wall that bare copper wire and then just put a wire nut on top and tighten it down so you can see that it's starting to twist here that's usually a pretty good indication that they're well wrapped together so now we're going to

Automatically transcribed from the source video.

Step 5 of 8: Connect Ground Wire

Locate the ground wire (typically bare copper or green) in the electrical box. Connect this wire to the green grounding screw or the green wire on the new motion sensor switch. This connection is essential for safety.

Open this step in the guide

Every video in How to Install a Motion-Sensor Light Switch in a Stairway

  1. Step 1: Turn Off Power

  2. Step 2: Remove Existing Switch Plate and Switch

  3. Step 3: Identify and Disconnect Wires

  4. Step 4: Connect Motion Sensor Switch - Line and Load

  5. Step 5: Connect Ground Wire

  6. Step 6: Mount the Motion Sensor Switch

  7. Step 7: Install the Cover Plate

  8. Step 8: Restore Power and Test

Questions about How to Install a Motion-Sensor Light Switch in a Stairway

My stairway has two light switches controlling the same light (a 3-way setup). Can I still install this type of motion sensor switch?

Most standard motion sensor light switches, like the Leviton Decora model listed, are designed for single-pole applications (one switch controlling one light). For a 3-way setup, you would need a specialized 3-way compatible motion sensor switch, which may involve different wiring or require professional installation.

Is the 2-hour estimated time realistic for a beginner, and what factors might make it take longer?

The 2-hour estimate is generally realistic for a beginner if the existing wiring is straightforward and you follow the instructions carefully. However, encountering older, unfamiliar wiring, needing to do extra troubleshooting, or simply being new to electrical work can extend the time. Patience and double-checking each step are crucial.

How do I choose the best motion sensor light switch for a stairway to ensure reliable detection?

For a stairway, look for a motion sensor switch with a wide detection angle and adjustable sensitivity to reliably cover the entire area, including both the top and bottom. Consider models with adjustable 'on' times and an ambient light sensor to prevent unnecessary activation during daylight hours, saving energy.

How to Install a Motion-Sensor Light Switch in a Stairway

This project outlines the steps for installing a motion sensor light switch to automate lighting in a stairway. It covers preparation, wiring, mounting, and testing the new switch.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Connect Ground Wires — How to Install a Motion-Sensor Light Switch in a Stairway | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.