Wire the New Motion Sensor Switch
From How to Install a Motion-Sensor Light Switch in a Stairway · Step 4 of 8 · Video by Below Average DIY

Showing 0:34–0:47 of the source video. Watch the full video with every moment.
What happens in this clip
Carefully detach the wires from the old light switch. Consult the instruction manual provided with the new Lutron motion sensor switch for the correct wiring configuration. There are typically different wiring setups depending on whether a neutral wire is present or not. Connect the existing wires from the wall box to the corresponding terminals or pigtails on the new motion sensor switch, securing them with wire nuts. Before pushing the switch completely back into the wall, temporarily turn the circuit breaker back on to test if the switch is receiving power and the lights turn on/off as expected. If the lights work, turn the breaker off again before proceeding.
Goal: Properly connect the electrical wires to the new motion sensor switch
What's used
Tools
- Electrical Tape
- Lutron Motion Sensor Switch Lutron
- Wire Nuts
- Crimp connectors
About the full video
This project guides you through replacing a standard light switch with a motion sensor light switch in a garage. It covers turning off power, removing the old switch, wiring the new motion sensor switch, and finally installing it, enhancing convenience and saving energy.
Step 4 of 8: Connect Motion Sensor Switch - Line and Load
Refer to the wiring diagram provided with your motion sensor switch. Connect the 'line' wire (power source) to the terminal or wire designated for 'line' or 'input' on the new switch. Connect the 'load' wire (to the light fixture) to the terminal or wire designated for 'load' or 'output' on the new switch. Ensure connections are secure.
Every video in How to Install a Motion-Sensor Light Switch in a Stairway
Step 1: Turn Off Power
- 0:37–0:52 Cut Power at Circuit Breaker
- 0:51–0:57 Turn off Power at Breaker
- 0:49–0:55 Disconnect Power
Step 2: Remove Existing Switch Plate and Switch
- 27:53–28:00 Remove Existing Switch Plate and Switch
- 0:25–0:34 Remove Existing Light Switch
- 1:46–2:24 Remove Existing Switch and Cover
Step 3: Identify and Disconnect Wires
- 0:05–0:24 Identify and Disconnect Wires
- 2:44–4:10 Disconnect Old Switch & Identify Wires
- 0:47–1:01 Disconnect the Wires Connected to the Outlet Switch
Step 4: Connect Motion Sensor Switch - Line and Load
- 0:34–0:47 Wire the New Motion Sensor Switch (this video)
- 5:45–6:30 Wire the Motion Sensor Switch
- 0:05–0:11 Wire New Motion Sensor Switch
Step 5: Connect Ground Wire
- 3:28–3:58 Connect Ground Wires
- 0:52–0:58 Connect the Ground Wire
- 0:59–1:07 Connect Ground Wire to New Switch
Step 6: Mount the Motion Sensor Switch
- 0:11–0:12 Mount Motion Sensor Switch
- 0:47–0:55 Mount Switch and Attach Faceplate
- 2:41–3:07 Mount Switch and Adjust Settings
Step 7: Install the Cover Plate
- 7:43–7:51 Install Wall Plate
- 3:07–3:55 Install Cover Plate and Final Test
- 4:51–5:25 Mount Switch and Install Faceplate
Step 8: Restore Power and Test
- 2:14–2:58 Restore Power and Test Functionality
- 3:16–4:29 Restore Power and Test Functionality
- 5:30–5:53 Test Switch Operation
Questions about How to Install a Motion-Sensor Light Switch in a Stairway
My stairway has two light switches controlling the same light (a 3-way setup). Can I still install this type of motion sensor switch?
Most standard motion sensor light switches, like the Leviton Decora model listed, are designed for single-pole applications (one switch controlling one light). For a 3-way setup, you would need a specialized 3-way compatible motion sensor switch, which may involve different wiring or require professional installation.
Is the 2-hour estimated time realistic for a beginner, and what factors might make it take longer?
The 2-hour estimate is generally realistic for a beginner if the existing wiring is straightforward and you follow the instructions carefully. However, encountering older, unfamiliar wiring, needing to do extra troubleshooting, or simply being new to electrical work can extend the time. Patience and double-checking each step are crucial.
How do I choose the best motion sensor light switch for a stairway to ensure reliable detection?
For a stairway, look for a motion sensor switch with a wide detection angle and adjustable sensitivity to reliably cover the entire area, including both the top and bottom. Consider models with adjustable 'on' times and an ambient light sensor to prevent unnecessary activation during daylight hours, saving energy.
How to Install a Motion-Sensor Light Switch in a Stairway
This project outlines the steps for installing a motion sensor light switch to automate lighting in a stairway. It covers preparation, wiring, mounting, and testing the new switch.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

