powered by

Mount Motion Sensor Switch

From How to Install a Motion-Sensor Light Switch in a Stairway · Step 6 of 8 · Video by Start at Home

Showing 0:11–0:12 of the source video. Watch the full video with every moment.

What happens in this clip

Once the wires are securely connected, carefully push the wired motion sensor switch back into the electrical box. Use the screws provided with the switch to secure it to the electrical box. Finally, attach the new cover plate over the switch, ensuring it is flush with the wall and that the switch toggle/sensor is properly exposed.

Goal: Securely install the new motion sensor switch in the wall.

What's used

Tools

  • Screwdriver
  • Flathead screwdriver

About the full video

This DIY project guides you through replacing a standard light switch with a motion sensor wall switch to automatically control closet lighting, enhancing convenience and energy efficiency. Additionally, it provides a practical tip for organizing closet shelves using clear dividers to keep folded items tidy.

What's said in this clip

do you have lights that get left on all the time so do I especially in the kids closets so I found this awesome motion sensor wall switch that is actually easier to switch out than I thought and look at that oh and a little more organization don't forget these clear dividers they work wonders

Automatically transcribed from the source video.

Step 6 of 8: Mount the Motion Sensor Switch

Gently fold the connected wires back into the electrical box, ensuring they are not pinched. Align the mounting screws on the new motion sensor switch with the corresponding holes in the electrical box. Screw the switch into place until it is snug against the wall.

Open this step in the guide

Every video in How to Install a Motion-Sensor Light Switch in a Stairway

  1. Step 1: Turn Off Power

  2. Step 2: Remove Existing Switch Plate and Switch

  3. Step 3: Identify and Disconnect Wires

  4. Step 4: Connect Motion Sensor Switch - Line and Load

  5. Step 5: Connect Ground Wire

  6. Step 6: Mount the Motion Sensor Switch

  7. Step 7: Install the Cover Plate

  8. Step 8: Restore Power and Test

Questions about How to Install a Motion-Sensor Light Switch in a Stairway

My stairway has two light switches controlling the same light (a 3-way setup). Can I still install this type of motion sensor switch?

Most standard motion sensor light switches, like the Leviton Decora model listed, are designed for single-pole applications (one switch controlling one light). For a 3-way setup, you would need a specialized 3-way compatible motion sensor switch, which may involve different wiring or require professional installation.

Is the 2-hour estimated time realistic for a beginner, and what factors might make it take longer?

The 2-hour estimate is generally realistic for a beginner if the existing wiring is straightforward and you follow the instructions carefully. However, encountering older, unfamiliar wiring, needing to do extra troubleshooting, or simply being new to electrical work can extend the time. Patience and double-checking each step are crucial.

How do I choose the best motion sensor light switch for a stairway to ensure reliable detection?

For a stairway, look for a motion sensor switch with a wide detection angle and adjustable sensitivity to reliably cover the entire area, including both the top and bottom. Consider models with adjustable 'on' times and an ambient light sensor to prevent unnecessary activation during daylight hours, saving energy.

How to Install a Motion-Sensor Light Switch in a Stairway

This project outlines the steps for installing a motion sensor light switch to automate lighting in a stairway. It covers preparation, wiring, mounting, and testing the new switch.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Mount Motion Sensor Switch — How to Install a Motion-Sensor Light Switch in a Stairway | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.