powered by

How to Install a Motion Sensor Light Switch!

Video by Kevin Jones · 2 moments used in Oak Valley Designs's DIY guides · 4:04 long

Moments in this video

  1. 2:41–3:07 Mount Switch and Adjust Settings From How to Install a Motion-Sensor Light Switch in a Stairway, Step 6: Mount the Motion Sensor Switch

    After all wires are securely connected and insulated, carefully push the wires back into the electrical box, making sure they are tucked away without undue stress or pinching. Then, the motion sensor switch is mounted into the electrical box using the provided screws. Once the switch is physically secured, the power to the circuit is restored at the breaker panel. With power on, the lights in the gym, which the switch controls, illuminate. The installer then uses a small flathead screwdriver to adjust the sensitivity and timer settings, which are located under small plastic covers on the face of the motion sensor switch, customizing its operation.

  2. 3:07–3:55 Install Cover Plate and Final Test From How to Install a Motion-Sensor Light Switch in a Stairway, Step 7: Install the Cover Plate

    The final step involves installing the decorative switch plate cover over the newly installed motion sensor switch. This provides a finished look and covers the wiring. After the cover is in place, the light's operation is tested again to confirm that the motion sensor is functioning correctly and the light turns on and off as expected based on the set sensitivity and timer. The video shows the light turning off after a set period, demonstrating the successful installation and operation of the motion sensor switch.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

How to Install a Motion Sensor Light Switch! — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.