Install Wall Plate
From How to Install a Motion-Sensor Light Switch in a Stairway · Step 7 of 8 · Video by How To Home

Showing 7:43–7:51 of the source video. Watch the full video with every moment.
What happens in this clip
Finally, install the decorative wall plate over the new motion sensor light switch. Screw the wall plate onto the electrical box using the provided screws and then snap the decorative cover plate into place for a clean, finished look.
Goal: Complete the installation by attaching the wall plate.
What's used
Tools
- Screwdriver
Materials
- Decorative Cover Plate
- Wall Plate
About the full video
This video provides step-by-step instructions on how to install a motion sensor light switch. The project aims to save electricity by automatically turning lights off when a room is vacant and offers the convenience of automatic light activation upon entry. The installation process covers disconnecting the old switch, understanding the new motion sensor switch's wiring, connecting ground, neutral, and hot wires, securely mounting the new switch, and finally programming its timeout and sensor sensitivity settings.
What's said in this clip
it would be two flashes so you have to hold down both of these buttons at the same time and there's one flash so it is set to low sensitivity all right guys that's pretty much all there is to installing one of these motion sensor switches as you saw really easy to do and maybe this is the solution that you needed in order to make sure that your lights
Automatically transcribed from the source video.
Step 7 of 8: Install the Cover Plate
Place the new cover plate over the motion sensor switch, aligning the screw holes. Secure the cover plate using the provided screws. Ensure the plate is flush with the wall surface.
Every video in How to Install a Motion-Sensor Light Switch in a Stairway
Step 1: Turn Off Power
- 0:37–0:52 Cut Power at Circuit Breaker
- 0:51–0:57 Turn off Power at Breaker
- 0:49–0:55 Disconnect Power
Step 2: Remove Existing Switch Plate and Switch
- 27:53–28:00 Remove Existing Switch Plate and Switch
- 0:25–0:34 Remove Existing Light Switch
- 1:46–2:24 Remove Existing Switch and Cover
Step 3: Identify and Disconnect Wires
- 0:05–0:24 Identify and Disconnect Wires
- 2:44–4:10 Disconnect Old Switch & Identify Wires
- 0:47–1:01 Disconnect the Wires Connected to the Outlet Switch
Step 4: Connect Motion Sensor Switch - Line and Load
- 0:34–0:47 Wire the New Motion Sensor Switch
- 5:45–6:30 Wire the Motion Sensor Switch
- 0:05–0:11 Wire New Motion Sensor Switch
Step 5: Connect Ground Wire
- 3:28–3:58 Connect Ground Wires
- 0:52–0:58 Connect the Ground Wire
- 0:59–1:07 Connect Ground Wire to New Switch
Step 6: Mount the Motion Sensor Switch
- 0:11–0:12 Mount Motion Sensor Switch
- 0:47–0:55 Mount Switch and Attach Faceplate
- 2:41–3:07 Mount Switch and Adjust Settings
Step 7: Install the Cover Plate
- 7:43–7:51 Install Wall Plate (this video)
- 3:07–3:55 Install Cover Plate and Final Test
- 4:51–5:25 Mount Switch and Install Faceplate
Step 8: Restore Power and Test
- 2:14–2:58 Restore Power and Test Functionality
- 3:16–4:29 Restore Power and Test Functionality
- 5:30–5:53 Test Switch Operation
Questions about How to Install a Motion-Sensor Light Switch in a Stairway
My stairway has two light switches controlling the same light (a 3-way setup). Can I still install this type of motion sensor switch?
Most standard motion sensor light switches, like the Leviton Decora model listed, are designed for single-pole applications (one switch controlling one light). For a 3-way setup, you would need a specialized 3-way compatible motion sensor switch, which may involve different wiring or require professional installation.
Is the 2-hour estimated time realistic for a beginner, and what factors might make it take longer?
The 2-hour estimate is generally realistic for a beginner if the existing wiring is straightforward and you follow the instructions carefully. However, encountering older, unfamiliar wiring, needing to do extra troubleshooting, or simply being new to electrical work can extend the time. Patience and double-checking each step are crucial.
How do I choose the best motion sensor light switch for a stairway to ensure reliable detection?
For a stairway, look for a motion sensor switch with a wide detection angle and adjustable sensitivity to reliably cover the entire area, including both the top and bottom. Consider models with adjustable 'on' times and an ambient light sensor to prevent unnecessary activation during daylight hours, saving energy.
How to Install a Motion-Sensor Light Switch in a Stairway
This project outlines the steps for installing a motion sensor light switch to automate lighting in a stairway. It covers preparation, wiring, mounting, and testing the new switch.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

