Connect Ground Wire to New Switch
From How to Install a Motion-Sensor Light Switch in a Stairway · Step 5 of 8 · Video by Ultimate Tech Hub

Showing 0:59–1:07 of the source video. Watch the full video with every moment.
What happens in this clip
Take the ground wire (the one previously detached from the old switch) and insert its exposed end into the designated slot next to the green screw on the new Leviton motion sensor switch. Then, use a screwdriver to tighten the green screw until the ground wire is firmly secured.
Goal: Establish a secure ground connection for the motion sensor switch.
What's used
Tools
- Leviton Motion Sensor Switch Leviton
- Screwdriver
Materials
- Ground Wire
About the full video
This project provides a step-by-step guide on how to replace a standard light switch with a Leviton motion sensor light switch, specifically for a pantry. The process involves safely removing the old switch, preparing the existing wiring, connecting the new motion sensor switch, and then configuring its settings for time-out and light sensitivity. The goal is to automate lighting for convenience and energy efficiency.
Step 5 of 8: Connect Ground Wire
Locate the ground wire (typically bare copper or green) in the electrical box. Connect this wire to the green grounding screw or the green wire on the new motion sensor switch. This connection is essential for safety.
Every video in How to Install a Motion-Sensor Light Switch in a Stairway
Step 1: Turn Off Power
- 0:37–0:52 Cut Power at Circuit Breaker
- 0:51–0:57 Turn off Power at Breaker
- 0:49–0:55 Disconnect Power
Step 2: Remove Existing Switch Plate and Switch
- 27:53–28:00 Remove Existing Switch Plate and Switch
- 0:25–0:34 Remove Existing Light Switch
- 1:46–2:24 Remove Existing Switch and Cover
Step 3: Identify and Disconnect Wires
- 0:05–0:24 Identify and Disconnect Wires
- 2:44–4:10 Disconnect Old Switch & Identify Wires
- 0:47–1:01 Disconnect the Wires Connected to the Outlet Switch
Step 4: Connect Motion Sensor Switch - Line and Load
- 0:34–0:47 Wire the New Motion Sensor Switch
- 5:45–6:30 Wire the Motion Sensor Switch
- 0:05–0:11 Wire New Motion Sensor Switch
Step 5: Connect Ground Wire
- 3:28–3:58 Connect Ground Wires
- 0:52–0:58 Connect the Ground Wire
- 0:59–1:07 Connect Ground Wire to New Switch (this video)
Step 6: Mount the Motion Sensor Switch
- 0:11–0:12 Mount Motion Sensor Switch
- 0:47–0:55 Mount Switch and Attach Faceplate
- 2:41–3:07 Mount Switch and Adjust Settings
Step 7: Install the Cover Plate
- 7:43–7:51 Install Wall Plate
- 3:07–3:55 Install Cover Plate and Final Test
- 4:51–5:25 Mount Switch and Install Faceplate
Step 8: Restore Power and Test
- 2:14–2:58 Restore Power and Test Functionality
- 3:16–4:29 Restore Power and Test Functionality
- 5:30–5:53 Test Switch Operation
Questions about How to Install a Motion-Sensor Light Switch in a Stairway
My stairway has two light switches controlling the same light (a 3-way setup). Can I still install this type of motion sensor switch?
Most standard motion sensor light switches, like the Leviton Decora model listed, are designed for single-pole applications (one switch controlling one light). For a 3-way setup, you would need a specialized 3-way compatible motion sensor switch, which may involve different wiring or require professional installation.
Is the 2-hour estimated time realistic for a beginner, and what factors might make it take longer?
The 2-hour estimate is generally realistic for a beginner if the existing wiring is straightforward and you follow the instructions carefully. However, encountering older, unfamiliar wiring, needing to do extra troubleshooting, or simply being new to electrical work can extend the time. Patience and double-checking each step are crucial.
How do I choose the best motion sensor light switch for a stairway to ensure reliable detection?
For a stairway, look for a motion sensor switch with a wide detection angle and adjustable sensitivity to reliably cover the entire area, including both the top and bottom. Consider models with adjustable 'on' times and an ambient light sensor to prevent unnecessary activation during daylight hours, saving energy.
How to Install a Motion-Sensor Light Switch in a Stairway
This project outlines the steps for installing a motion sensor light switch to automate lighting in a stairway. It covers preparation, wiring, mounting, and testing the new switch.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

