Sand and Finish Stairs
From How to Build Basement Stairs · Step 9 of 9 · Video by Jay Bates

Showing 8:53–11:22 of the source video. Watch the full video with every moment.
What happens in this clip
Once the glue has dried and the stairs are fully assembled, use an orbital sander to smooth all surfaces of the wooden stairs, paying attention to both the stringer and the treads. Start with a coarser grit and progressively move to finer grits for a smooth finish. After sanding, clean off any dust. Then, apply a few coats of spray shellac, allowing adequate drying time between coats, to provide a durable and protective finish for the wood.
Goal: Sand the entire assembled cat stair unit to achieve a smooth surface, then apply a protective finish using spray shellac.
What's used
Tools
- Orbital Sander
- Sandpaper
- Shellac
- Spray Gun/Applicator
About the full video
This video details the process of constructing custom wooden stairs designed for a pet cat with decreased mobility. The project involves selecting and milling lumber (walnut for stringers, white oak for treads), precision cutting of all components, creating dado joinery, rounding over edges using a router and jig, and finally assembling and finishing the stairs with shellac. The goal is to provide a safe and accessible way for an older cat to reach its elevated food platform.
What's said in this clip
[Music] um for a finish i went with just basic sprayed shellac and let it dry overnight there's there's nothing fancy that's necessary for this project as far as the finish goes i don't need to go with any more protection than this it's simply here to serve a purpose of letting the cat go up and down uh in less pain with without having to jump so much so uh will she use it yes i know for sure she will use it because i'm currently using a piece of half inch pine cd plywood to test out the concept and uh she uses it just fine so i'm i'm excited to get that piece of half inch pine cd plywood out of my living room actually let me rephrase that my wife is excited to get that piece of plywood out of the living room and put this one there in its place thank you to rockler woodworking hardware for supporting this video i'll have links down in the description below where you can check out some of the tools that i use to make this and if you're just generally in a need or if you have a general need to purchase a tool consider checking out rockler i think that's it for this project there's really not much to say it was just a quick win one day build if you want to stay up to date with everything that i publish go to my website jacecustomcreations.com newsletter and sign up for my email newsletter i'm going to quit talking and show you some i guess some cell phone footage of the cat actually going up and down it because i doubt i could get her to do it right now when i'm shooting this outro you guys take care have a great day and i'll talk to you in the next video oh you went up faster than i was hoping all right driving the dogs nuts
Automatically transcribed from the source video.
Step 9 of 9: Sand and Finish Treads and Risers
Once the stairs are fully assembled and all fasteners are countersunk or flush, begin the finishing process. Sand all surfaces of the treads and risers to remove any rough spots, splinters, or pencil marks. Start with a medium-grit sandpaper and finish with a fine-grit for a smooth feel. Clean off all dust thoroughly. Apply your chosen finish according to the manufacturer's instructions. This usually involves multiple coats with light sanding between coats for paint or stain. Sealant or polyurethane will protect the wood from wear and moisture.
Every video in How to Build Basement Stairs
Step 1: Measure and Plan Stair Location
- 1:14–1:25 Measure and Calculate Stair Dimensions
- 0:11–1:48 Calculate and Layout Staircase Dimensions
- 0:00–2:15 Calculate Stair Dimensions
Step 2: Cut Stair Stringers
- 0:57–1:08 Lay Out and Cut the First Stringer
- 5:24–6:18 Cut Stair Stringers from Lumber
- 2:20–3:14 Mark and Cut Stringers
Step 3: Install Top Support for Stringers
- 12:25–12:49 Install Ledger Board for Stringers
- 5:17–6:26 Determine Stringer Attachment to Deck Band Board
- 13:16–13:26 Attach Stair Stringer Ledger
Step 4: Attach Stringers to Top Support
- 30:00–35:46 Install Stringers and Brackets
- 6:49–8:07 Install Stringers
- 9:15–10:09 Installing Stringer Hangers to Deck
Step 5: Secure Bottom of Stringers
- 10:09–11:12 Securing Stringers to Landing Pad with Base Plate
- 9:41–10:36 Anchor Stringer Base Plate to Concrete
- 18:03–22:29 Secure Staircase Bottom
Step 6: Cut and Install Treads
- 10:15–17:22 Install Risers and Treads
- 10:10–11:50 Apply Adhesive and Install Treads
- 0:06–0:09 Install Treads and Risers
Step 7: Cut and Install Risers (Optional but Recommended)
- 30:57–33:30 Install Stair Risers
- 8:38–11:15 Install Risers
- 0:06–0:09 Install Treads and Risers
Step 8: Install Handrails and Balusters
- 0:32–0:45 Install Handrails
- 5:36–6:05 Install Balusters and Handrail
- 11:30–13:16 Install Balusters
Step 9: Sand and Finish Treads and Risers
- 0:37–0:41 Sand the Staircase
- 8:53–11:22 Sand and Finish Stairs (this video)
- 0:08–1:13 Prepare and Finish Wood Stair Treads
How to Build Basement Stairs
This project outlines the steps for building a safe and code-compliant set of stairs to a basement. It covers planning, material selection, cutting, assembly, and finishing, emphasizing structural integrity and safety features.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

