powered by

Prepare and Finish Wood Stair Treads

From How to Build Basement Stairs · Step 9 of 9 · Video by DIY & Crafts

Showing 0:08–1:13 of the source video. Watch the full video with every moment.

What happens in this clip

Begin by taking raw wooden planks that will serve as stair treads. Use a router to shape and finish the edges of each plank, creating a desired profile (e.g., rounded or beveled). After routing, thoroughly sand the entire surface of each plank, including the routed edges, using an orbital sander to achieve a smooth finish. Once sanded, apply a protective and decorative wood stain or finish to all surfaces of the treads using a small paint roller. Ensure even coverage and allow proper drying time between coats as per product instructions.

Goal: Fabricate and finish custom wood stair treads

What's used

Tools

  • Hearing Protection
  • Orbital Sander Bosch
  • Random orbital sander
  • Sanding block
  • Paint Roller
  • Spray gun
  • Applicator pad
  • Router Bosch
  • Sanding block with abrasive paper
  • Safety Glasses
  • Work Gloves

Materials

  • Wood Stain/Finish Decorator Paint (label visible)
  • Polyurethane finish
  • Wood oil
  • Wooden Planks
  • Laminated planks

About the full video

This project guides you through the process of installing custom-made wood stair treads onto an existing concrete staircase. It details the woodworking steps of shaping, sanding, and staining the wooden planks, followed by their secure installation using expanding foam adhesive to ensure a level and durable finish.

Step 9 of 9: Sand and Finish Treads and Risers

Once the stairs are fully assembled and all fasteners are countersunk or flush, begin the finishing process. Sand all surfaces of the treads and risers to remove any rough spots, splinters, or pencil marks. Start with a medium-grit sandpaper and finish with a fine-grit for a smooth feel. Clean off all dust thoroughly. Apply your chosen finish according to the manufacturer's instructions. This usually involves multiple coats with light sanding between coats for paint or stain. Sealant or polyurethane will protect the wood from wear and moisture.

Open this step in the guide

Every video in How to Build Basement Stairs

  1. Step 1: Measure and Plan Stair Location

  2. Step 2: Cut Stair Stringers

  3. Step 3: Install Top Support for Stringers

  4. Step 4: Attach Stringers to Top Support

  5. Step 5: Secure Bottom of Stringers

  6. Step 6: Cut and Install Treads

  7. Step 7: Cut and Install Risers (Optional but Recommended)

  8. Step 8: Install Handrails and Balusters

  9. Step 9: Sand and Finish Treads and Risers

Questions about How to Build Basement Stairs

What are the most critical building code requirements I need to understand for safe basement stairs?

Focus on consistent rise and run dimensions for each step, minimum tread depth, maximum riser height, minimum headroom clearance, handrail height, and baluster spacing. These vary by location, so always consult your local building department for specific requirements before starting your project to ensure compliance and safety.

Are specialized tools like stair gauges and an orbital sander truly necessary for building basement stairs?

Yes, stair gauges are highly recommended as they attach to your framing square, ensuring precise, repeatable cuts for consistent rise and run on your stringers, which is crucial for safety. An orbital sander significantly speeds up and improves the finish quality of your treads and risers, making the final product look professional.

What's the most challenging part of building basement stairs for an intermediate DIYer, and how can I prepare for it?

The most challenging part is accurately laying out and cutting the stringers, as even slight inconsistencies can lead to uneven, unsafe steps. Prepare by double-checking all measurements, using stair gauges for precision, making a practice cut on a scrap piece, and taking your time to ensure perfect angles and lengths.

What common mistakes do DIYers make when building stair stringers, and how can I avoid them?

A common mistake is incorrect calculations or cuts leading to an inconsistent rise or run, creating a tripping hazard. Avoid this by meticulously measuring your total rise, calculating the exact individual rise and run, using stair gauges correctly, and dry-fitting your layout before making final cuts on all stringers.

Why is selecting 'premium lumber' important for stair stringers, and what should I look for?

Premium lumber, typically 2x12s, is crucial for stringers because it has fewer knots and straighter grain, reducing the chance of warping or weakness. Look for boards that are straight, free of large knots, cracks, or excessive bowing, as these defects can compromise the structural integrity and appearance of your stairs.

Is it better to sand and finish the treads and risers before or after installing them?

Sanding and finishing treads and risers before installation is generally easier and produces a more uniform finish, especially if you're staining. It prevents drips onto other surfaces and allows you to work comfortably. However, you'll need to be very careful during installation to avoid damaging the finished surfaces.

How to Build Basement Stairs

This project outlines the steps for building a safe and code-compliant set of stairs to a basement. It covers planning, material selection, cutting, assembly, and finishing, emphasizing structural integrity and safety features.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Prepare and Finish Wood Stair Treads — How to Build Basement Stairs | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.