Install Treads and Risers
From How to Build Basement Stairs · Step 6 of 9 · Video by The BC Builder

Showing 0:06–0:09 of the source video. Watch the full video with every moment.
What happens in this clip
Cut the treads (the horizontal walking surface) and risers (the vertical panels) to the exact dimensions required for each step. Precision is key to a snug fit. Apply construction adhesive, commonly referred to as 'glue,' to the top of the stringers and the back of the riser where it meets the stringer. This adhesive helps prevent squeaks and adds significant structural strength. Then, carefully install each riser, followed by its corresponding tread. Secure both with appropriate fasteners, such as finish nails or screws, ensuring they are flush and level.
Goal: Cover the stringers with treads and risers to create the stair steps
What's used
Tools
- Caulk Gun Unspecified
- Circular Saw/Miter Saw Unspecified
- Measuring Tape Unspecified
- Plywood or Solid Wood Unspecified
- Engineered wood
- Pneumatic Nailer/Screws Unspecified
- Cordless drill and trim head screws
Materials
- Construction Adhesive Unspecified
About the full video
This project outlines the process of building a wooden staircase, including cutting stringers, installing them, attaching treads and risers with glue for stability, framing a support wall, and completing a lower flight of stairs. The process emphasizes precision to ensure a solid and comfortable final product.
Step 6 of 9: Cut and Install Treads
Measure the depth of each step opening (the run) and the width of the stairs. Cut your tread material to these dimensions. The treads should typically overhang the riser by about 1 inch. Common tread materials include 2x lumber (like pine or oak), plywood, or specially made stair treads. Treads are usually attached by screwing through the stringer into the underside of the tread, or by using specialized tread brackets. For a cleaner look, you can notch the stringers to accept the treads, but ensure this does not compromise the stringer's strength. Ensure treads are level and securely fastened.
Every video in How to Build Basement Stairs
Step 1: Measure and Plan Stair Location
- 1:14–1:25 Measure and Calculate Stair Dimensions
- 0:11–1:48 Calculate and Layout Staircase Dimensions
- 0:00–2:15 Calculate Stair Dimensions
Step 2: Cut Stair Stringers
- 0:57–1:08 Lay Out and Cut the First Stringer
- 5:24–6:18 Cut Stair Stringers from Lumber
- 2:20–3:14 Mark and Cut Stringers
Step 3: Install Top Support for Stringers
- 12:25–12:49 Install Ledger Board for Stringers
- 5:17–6:26 Determine Stringer Attachment to Deck Band Board
- 13:16–13:26 Attach Stair Stringer Ledger
Step 4: Attach Stringers to Top Support
- 30:00–35:46 Install Stringers and Brackets
- 6:49–8:07 Install Stringers
- 9:15–10:09 Installing Stringer Hangers to Deck
Step 5: Secure Bottom of Stringers
- 10:09–11:12 Securing Stringers to Landing Pad with Base Plate
- 9:41–10:36 Anchor Stringer Base Plate to Concrete
- 18:03–22:29 Secure Staircase Bottom
Step 6: Cut and Install Treads
- 10:15–17:22 Install Risers and Treads
- 10:10–11:50 Apply Adhesive and Install Treads
- 0:06–0:09 Install Treads and Risers (this video)
Step 7: Cut and Install Risers (Optional but Recommended)
- 30:57–33:30 Install Stair Risers
- 8:38–11:15 Install Risers
- 0:06–0:09 Install Treads and Risers
Step 8: Install Handrails and Balusters
- 0:32–0:45 Install Handrails
- 5:36–6:05 Install Balusters and Handrail
- 11:30–13:16 Install Balusters
Step 9: Sand and Finish Treads and Risers
- 0:37–0:41 Sand the Staircase
- 8:53–11:22 Sand and Finish Stairs
- 0:08–1:13 Prepare and Finish Wood Stair Treads
How to Build Basement Stairs
This project outlines the steps for building a safe and code-compliant set of stairs to a basement. It covers planning, material selection, cutting, assembly, and finishing, emphasizing structural integrity and safety features.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

