Install Risers
From How to Build Basement Stairs · Step 7 of 9 · Video by AwesomeFramers

Showing 8:38–11:15 of the source video. Watch the full video with every moment.
What happens in this clip
Install the risers (2x8s) into the pre-cut stair stringers. Use a hammer to tap the risers firmly into place, ensuring a snug fit against the stringer. The bottom of the risers should be cut 1/8 inch shorter to allow for potential subfloor variations and prevent squeaking. Use a cordless drill with structural screws to secure the risers to the stringers. Apply leg pressure to hold the riser in place while driving the screw. Even if a screw misses, it can be removed and redriven without compromising the overall structure, demonstrating the flexibility of structural screws over nails.
Goal: Securely attach 2x8 risers to stair stringers
What's used
Tools
- 2x8 Risers
- Cordless Drill
- Hammer
- Stair Stringers
- Structural Screws
About the full video
This project guides you through the process of building sturdy site-built stairs, focusing on efficient cutting and assembly techniques for risers and treads. It emphasizes precision in measurements, the use of a circular saw with a rip guide, and the secure fastening of components with structural screws and subfloor adhesive to create a solid, squeak-free staircase.
What's said in this clip
okay we're on the home stretch let's get these things in [Music] so you can already see that we're spaced off of the wall what i like to do is check the bottom right on the money see remember that bottom cut i went ahead and cut it an eighth of an inch it's just the way things always work out it's easier to do that and if i need to glue shims i could but i don't think i've ever actually had to do that so because we have a two by stringer and then a two by spacer board then i need to fasten it with these screws structural screws so that's what i'm gonna do so i'm going to get it started i'm going to put pressure against it with my leg and i'm going to watch yeah i need to come up just a hair i want to be right on that blue line [Music] right on the money so i like to use these screws because it clamps so well that there's never going to be movement on the stringer yeah and even though i don't probably don't need to put one there i'm gonna do it because if you were to get a squeak here later you have to get under this it's not a not a fun thing [Music] yeah see that guy missed [Music] that's the beauty of screws right if i something goes a little wonky it's not the end of the world okay so that should have been number one and this is number four remember that from cutting the stringers that way even if there's some discrepancies they're just going to plane out we're not building furniture [Music] nice and strong i'm going to go ahead and do that to both of these down at the bottom yeah started nice and straight make sure it's on the floor boom and just for giggles i'll do the bottom
Automatically transcribed from the source video.
Step 7 of 9: Cut and Install Risers (Optional but Recommended)
Measure the exact height between each tread (riser height). Cut boards (often 1x lumber) to this height and the width of the stairs. Risers can be installed flush with the front of the tread or set back slightly. Secure them by screwing through the riser into the back of the tread above and into the stringer on the sides. While not always required by code, closed risers prevent items from falling through the stairs and offer a more finished look.
Every video in How to Build Basement Stairs
Step 1: Measure and Plan Stair Location
- 1:14–1:25 Measure and Calculate Stair Dimensions
- 0:11–1:48 Calculate and Layout Staircase Dimensions
- 0:00–2:15 Calculate Stair Dimensions
Step 2: Cut Stair Stringers
- 0:57–1:08 Lay Out and Cut the First Stringer
- 5:24–6:18 Cut Stair Stringers from Lumber
- 2:20–3:14 Mark and Cut Stringers
Step 3: Install Top Support for Stringers
- 12:25–12:49 Install Ledger Board for Stringers
- 5:17–6:26 Determine Stringer Attachment to Deck Band Board
- 13:16–13:26 Attach Stair Stringer Ledger
Step 4: Attach Stringers to Top Support
- 30:00–35:46 Install Stringers and Brackets
- 6:49–8:07 Install Stringers
- 9:15–10:09 Installing Stringer Hangers to Deck
Step 5: Secure Bottom of Stringers
- 10:09–11:12 Securing Stringers to Landing Pad with Base Plate
- 9:41–10:36 Anchor Stringer Base Plate to Concrete
- 18:03–22:29 Secure Staircase Bottom
Step 6: Cut and Install Treads
- 10:15–17:22 Install Risers and Treads
- 10:10–11:50 Apply Adhesive and Install Treads
- 0:06–0:09 Install Treads and Risers
Step 7: Cut and Install Risers (Optional but Recommended)
- 30:57–33:30 Install Stair Risers
- 8:38–11:15 Install Risers (this video)
- 0:06–0:09 Install Treads and Risers
Step 8: Install Handrails and Balusters
- 0:32–0:45 Install Handrails
- 5:36–6:05 Install Balusters and Handrail
- 11:30–13:16 Install Balusters
Step 9: Sand and Finish Treads and Risers
- 0:37–0:41 Sand the Staircase
- 8:53–11:22 Sand and Finish Stairs
- 0:08–1:13 Prepare and Finish Wood Stair Treads
How to Build Basement Stairs
This project outlines the steps for building a safe and code-compliant set of stairs to a basement. It covers planning, material selection, cutting, assembly, and finishing, emphasizing structural integrity and safety features.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

