powered by
Clip 1/3
Helpful?

Step 9 · Sand and Finish Treads and Risers

Once the stairs are fully assembled and all fasteners are countersunk or flush, begin the finishing process. Sand all surfaces of the treads and risers to remove any rough spots, splinters, or pencil marks. Start with a medium-grit sandpaper and finish with a fine-grit for a smooth feel. Clean off all dust thoroughly. Apply your chosen finish according to the manufacturer's instructions. This usually involves multiple coats with light sanding between coats for paint or stain. Sealant or polyurethane will protect the wood from wear and moisture.

Tools and Materials

Orbital Sander Paintbrush Sandpaper Polyurethane (Water Based) Tack Cloths Drop Cloth

You've reached the last step

Nice work — share this guide or find your next project.

Browse all guides →
Sand and Finish Treads and Risers · How to Build Basement Stairs · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.