powered by
Clip 1/3
Helpful?

Step 6 · Cut and Install Treads

Measure the depth of each step opening (the run) and the width of the stairs. Cut your tread material to these dimensions. The treads should typically overhang the riser by about 1 inch. Common tread materials include 2x lumber (like pine or oak), plywood, or specially made stair treads. Treads are usually attached by screwing through the stringer into the underside of the tread, or by using specialized tread brackets. For a cleaner look, you can notch the stringers to accept the treads, but ensure this does not compromise the stringer's strength. Ensure treads are level and securely fastened.

Tools and Materials

Circular Saw or Miter Saw Measuring Tape Pencil Level Plywood FastenMaster HeadLOK Structural Wood Screws 4-1/2 in. Hex Flat Head Wood Screws, Black (Single Fastener) Titebond 28 oz. Solvent-Based Heavy Duty Construction Adhesive (12-Pack) 5262
Cut and Install Treads · How to Build Basement Stairs · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.