powered by
Clip 1/3
Helpful?

Step 7 · Cut and Install Risers (Optional but Recommended)

Measure the exact height between each tread (riser height). Cut boards (often 1x lumber) to this height and the width of the stairs. Risers can be installed flush with the front of the tread or set back slightly. Secure them by screwing through the riser into the back of the tread above and into the stringer on the sides. While not always required by code, closed risers prevent items from falling through the stairs and offer a more finished look.

Tools and Materials

Miter Saw Measuring Tape Pencil Level Pine Wood Wood Screws
Cut and Install Risers (Optional but Recommended) · How to Build Basement Stairs · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.