powered by

Wire a Three-Way Switch Circuit

From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 4 of 7 · Video by DIY Dave

Showing 5:49–6:58 of the source video. Watch the full video with every moment.

What happens in this clip

The full wiring for a three-way switch circuit with two switches and a light is demonstrated. Power comes into the first switch box using 14-2 wire. The neutral (white) is directly spliced through both switch boxes to the light fixture. The ground wires (bare copper) are all connected together and to the ground screw on each switch. The hot (black) from the incoming power goes to the common terminal of the first three-way switch. Two traveler wires (black and red from 14-3 wire) connect between the traveler terminals of the first switch and the traveler terminals of the second switch. The common terminal of the second three-way switch connects via a black wire to the hot terminal of the light fixture.

What's used

Tools

  • 14-2 Wire
  • 14-3 Wire
  • Light Fixture (or bulb socket)
  • Screwdriver
  • Two Three-Way Switches
  • WAGO Connectors
  • Wire Strippers

About the full video

This video provides a detailed guide on installing three-way switches to control lights from two locations, emphasizing wiring a new dedicated circuit for reliable operation. It covers the fundamental principles of switches, proper wire types (14-2 and 14-3), and step-by-step connection instructions for hot, neutral, and ground wires, as well as traveler wires between the switches.

Step 4 of 7: Install new 3-way switches

At the first switch location, connect the incoming hot (LINE) wire to the 'common' terminal (usually black or a different color screw). Connect the two 'traveler' wires to the two 'traveler' terminals (usually brass screws). At the second switch location, connect the wire coming from the first switch's traveler terminals to the traveler terminals on this switch. Connect the wire going to the light fixture (LOAD) to the 'common' terminal of this switch.

Open this step in the guide

Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom

  1. Step 1: De-energize the circuit

  2. Step 2: Remove existing switch and light fixture

  3. Step 3: Identify and label wires

  4. Step 4: Install new 3-way switches

  5. Step 5: Wire the light fixture

  6. Step 6: Install switch and fixture covers

  7. Step 7: Restore power and test operation

How to Wire a 3-way Switch for Stair Lights at the Top and Bottom

Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Wire a Three-Way Switch Circuit — How to Wire a 3-way Switch for Stair Lights at the Top and Bottom | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.