Turn Off Power at Breaker
From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 1 of 7 · Video by The Woggers Way DIY

Showing 2:06–2:13 of the source video. Watch the full video with every moment.
What happens in this clip
Go to your main electrical panel and identify the circuit breaker that controls the power to the switch you intend to work on. Once identified, flip the breaker to the 'OFF' position to cut off all electrical current to that circuit. This is the critical first step for electrical safety.
Goal: Locate and turn off the corresponding circuit breaker in the electrical panel to ensure there is no power to the switch you will be working on.
About the full video
This guide provides detailed, step-by-step instructions for safely installing or replacing a standard single-pole electrical switch that controls a single light fixture or device. It covers essential safety precautions, proper wire preparation, connection techniques to the switch terminals, and final installation of the switch and faceplate, highlighting best practices for durability and electrical safety.
Step 1 of 7: De-energize the circuit
Locate the circuit breaker that controls the stair lights and switch it to the 'OFF' position. If the circuit is not clearly labeled, turn off the main breaker to ensure all power is off.
Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Step 1: De-energize the circuit
- 0:08–0:36 Turn Off Circuit Breaker
- 0:03–0:08 Turn Off Power at Breaker Panel
- 2:06–2:13 Turn Off Power at Breaker (this video)
Step 2: Remove existing switch and light fixture
- 0:16–0:24 Remove Old Light Switch
- 17:23–17:28 Remove the old light switch
- 0:08–0:12 Remove Existing Light Switch
Step 3: Identify and label wires
- 2:06–2:27 Label All Wires
- 4:12–5:29 Identify the Line (Hot) Wire
- 0:25–1:15 Identify Wires and Switch Terminals
Step 4: Install new 3-way switches
- 5:49–6:58 Wire a Three-Way Switch Circuit
- 17:43–19:32 Connect Wires to Second Switch (Method 2)
- 5:22–7:16 Wire the Primary Three-Way Switch
Step 5: Wire the light fixture
- 4:17–4:29 Connect Load Wire to Common (Second Switch Box)
- 2:47–2:56 Connect Common (Light) to Switch 2
- 0:04–0:08 Connect Second Switch to Light Fixture
Step 6: Install switch and fixture covers
- 3:20–3:58 Secure New Switch and Install Button Cover
- 7:25–8:09 Install New Fixture Cover
- 1:42–1:43 Install Light Switch Cover Plate
Step 7: Restore power and test operation
- 3:39–3:54 Restore Power and Test Functionality
- 7:09–8:19 Restore Power and Test
- 6:26–6:54 Restore Power and Test Switches
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

