Restore Power and Test Functionality
From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 7 of 7 · Video by Family Handyman

Showing 3:39–3:54 of the source video. Watch the full video with every moment.
What happens in this clip
Return to the circuit breaker panel and flip the breaker switch back to the 'ON' position. Test both three-way switches. The light should be able to be turned on or off from either switch independently. If the light does not work or flickers, re-check all connections, ensuring they are secure and correctly wired according to the diagram.
Goal: Turn the power back on at the circuit breaker and test both three-way switches to ensure the light fixture operates correctly from both locations.
What's used
Tools
- Circuit Breaker Panel
About the full video
This video provides a step-by-step guide on how to correctly wire and install three-way switches to control a single light fixture from two different locations. The instructions focus on identifying and connecting the common, traveler, and ground wires, as well as the power source and the light fixture connection, emphasizing electrical safety by ensuring power is off before starting work.
Step 7 of 7: Restore power and test operation
Go back to the breaker panel and switch the circuit breaker to the 'ON' position. Test the light by operating each switch independently. The light should turn on or off regardless of the position of the other switch.
Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Step 1: De-energize the circuit
- 0:08–0:36 Turn Off Circuit Breaker
- 0:03–0:08 Turn Off Power at Breaker Panel
- 2:06–2:13 Turn Off Power at Breaker
Step 2: Remove existing switch and light fixture
- 0:16–0:24 Remove Old Light Switch
- 17:23–17:28 Remove the old light switch
- 0:08–0:12 Remove Existing Light Switch
Step 3: Identify and label wires
- 2:06–2:27 Label All Wires
- 4:12–5:29 Identify the Line (Hot) Wire
- 0:25–1:15 Identify Wires and Switch Terminals
Step 4: Install new 3-way switches
- 5:49–6:58 Wire a Three-Way Switch Circuit
- 17:43–19:32 Connect Wires to Second Switch (Method 2)
- 5:22–7:16 Wire the Primary Three-Way Switch
Step 5: Wire the light fixture
- 4:17–4:29 Connect Load Wire to Common (Second Switch Box)
- 2:47–2:56 Connect Common (Light) to Switch 2
- 0:04–0:08 Connect Second Switch to Light Fixture
Step 6: Install switch and fixture covers
- 3:20–3:58 Secure New Switch and Install Button Cover
- 7:25–8:09 Install New Fixture Cover
- 1:42–1:43 Install Light Switch Cover Plate
Step 7: Restore power and test operation
- 3:39–3:54 Restore Power and Test Functionality (this video)
- 7:09–8:19 Restore Power and Test
- 6:26–6:54 Restore Power and Test Switches
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

