Restore Power and Test Switches
From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 7 of 7 · Video by DIY with Michael Borders

Showing 6:26–6:54 of the source video. Watch the full video with every moment.
What happens in this clip
Go back to your main electrical panel and flip the circuit breaker (number 17 in this case) back to the 'ON' position to restore power. Return to the installed switches and test them. First, turn the light on using one of the new switches. Then, go to the other three-way switch in the room and turn the light off. Repeat this process to confirm that both switches can independently control the light fixture, demonstrating successful three-way circuit wiring. The demonstration shows the light turning on and off correctly from both switch locations.
Goal: Return to the electrical panel to restore power to the circuit, then test both three-way switches from both locations to confirm correct functionality.
About the full video
This project provides a step-by-step guide on how to safely replace a dual three-way light switch, focusing on correctly identifying and wiring the common, traveler, and ground wires to ensure seamless control from multiple locations. It includes essential safety precautions, detailed wiring explanations, and professional installation tips.
What's said in this clip
Now it's time to turn the power back on, circuit breaker number 17. And now to test it, I'll come to the entrance light, which is a dimmer. I'll turn that on. And as you can see, the light goes on and I'm going to walk across the room and this should turn it off as it does. Perfect. Back over to the other side and this should turn it off. And again, that's all the traveler wires communicating to each other.
Automatically transcribed from the source video.
Step 7 of 7: Restore power and test operation
Go back to the breaker panel and switch the circuit breaker to the 'ON' position. Test the light by operating each switch independently. The light should turn on or off regardless of the position of the other switch.
Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Step 1: De-energize the circuit
- 0:08–0:36 Turn Off Circuit Breaker
- 0:03–0:08 Turn Off Power at Breaker Panel
- 2:06–2:13 Turn Off Power at Breaker
Step 2: Remove existing switch and light fixture
- 0:16–0:24 Remove Old Light Switch
- 17:23–17:28 Remove the old light switch
- 0:08–0:12 Remove Existing Light Switch
Step 3: Identify and label wires
- 2:06–2:27 Label All Wires
- 4:12–5:29 Identify the Line (Hot) Wire
- 0:25–1:15 Identify Wires and Switch Terminals
Step 4: Install new 3-way switches
- 5:49–6:58 Wire a Three-Way Switch Circuit
- 17:43–19:32 Connect Wires to Second Switch (Method 2)
- 5:22–7:16 Wire the Primary Three-Way Switch
Step 5: Wire the light fixture
- 4:17–4:29 Connect Load Wire to Common (Second Switch Box)
- 2:47–2:56 Connect Common (Light) to Switch 2
- 0:04–0:08 Connect Second Switch to Light Fixture
Step 6: Install switch and fixture covers
- 3:20–3:58 Secure New Switch and Install Button Cover
- 7:25–8:09 Install New Fixture Cover
- 1:42–1:43 Install Light Switch Cover Plate
Step 7: Restore power and test operation
- 3:39–3:54 Restore Power and Test Functionality
- 7:09–8:19 Restore Power and Test
- 6:26–6:54 Restore Power and Test Switches (this video)
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

