Remove the old light switch
From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 2 of 7 · Video by Shannon Morse

Showing 17:23–17:28 of the source video. Watch the full video with every moment.
What happens in this clip
Using a screwdriver, carefully remove the faceplate of the old light switch. Unscrew the mounting screws that hold the switch in the electrical box. Gently pull the switch forward from the wall, exposing the wiring connections. Disconnect the wires by unscrewing wire nuts or terminal screws, noting which wires were connected to which terminals.
Goal: Remove the faceplate and screws securing the old light switch to the wall box. Carefully pull the switch out of the box and disconnect the wires.
What's used
Tools
- Screwdriver
About the full video
This project details the replacement of an old light fixture with a new industrial-style fixture and the installation of a Lutron Caséta smart dimmer switch in a newly finished bathroom. The process includes safely disconnecting old wiring, installing new components, and testing the smart features.
What's said in this clip
have to do is turn off the power at your breaker whichever circuit powers your specific outlet make sure that it's turned off of course so you don't spark yourself cassette does come with how to or quick start guides in the box so it's really easy to connect all the wires on the back of this and then cover them up with that little twisty thing that you stick on the end of wires and you're good to go so i definitely recommend testing it before you actually screw it
Automatically transcribed from the source video.
Step 2 of 7: Remove existing switch and light fixture
Unscrew the faceplate of the existing light switch. Carefully unscrew the switch from the electrical box, pulling it out to expose the wires. Note which wires are connected to the switch. Remove the light fixture canopy or cover to expose its wiring connections. Disconnect the wires from the light fixture.
Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Step 1: De-energize the circuit
- 0:08–0:36 Turn Off Circuit Breaker
- 0:03–0:08 Turn Off Power at Breaker Panel
- 2:06–2:13 Turn Off Power at Breaker
Step 2: Remove existing switch and light fixture
- 0:16–0:24 Remove Old Light Switch
- 17:23–17:28 Remove the old light switch (this video)
- 0:08–0:12 Remove Existing Light Switch
Step 3: Identify and label wires
- 2:06–2:27 Label All Wires
- 4:12–5:29 Identify the Line (Hot) Wire
- 0:25–1:15 Identify Wires and Switch Terminals
Step 4: Install new 3-way switches
- 5:49–6:58 Wire a Three-Way Switch Circuit
- 17:43–19:32 Connect Wires to Second Switch (Method 2)
- 5:22–7:16 Wire the Primary Three-Way Switch
Step 5: Wire the light fixture
- 4:17–4:29 Connect Load Wire to Common (Second Switch Box)
- 2:47–2:56 Connect Common (Light) to Switch 2
- 0:04–0:08 Connect Second Switch to Light Fixture
Step 6: Install switch and fixture covers
- 3:20–3:58 Secure New Switch and Install Button Cover
- 7:25–8:09 Install New Fixture Cover
- 1:42–1:43 Install Light Switch Cover Plate
Step 7: Restore power and test operation
- 3:39–3:54 Restore Power and Test Functionality
- 7:09–8:19 Restore Power and Test
- 6:26–6:54 Restore Power and Test Switches
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

