Install Light Switch Cover Plate
From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 6 of 7 · Video by How To Home

Showing 1:42–1:43 of the source video. Watch the full video with every moment.
What happens in this clip
Once all the wires are securely connected to the light switch and tucked neatly into the electrical box, align the light switch and screw it back into the electrical box. Then, replace the light switch cover plate and secure it with its screws.
Goal: Secure the light switch and install its cover plate.
What's used
Tools
- Screwdriver
Materials
- Cover Plate
- Light Switch
About the full video
This project guides you through the process of adding a new electrical outlet to a room by tapping into an existing light switch. It covers essential safety measures, techniques for running new wiring within a finished wall, proper wire connections, and how to avoid common, dangerous wiring mistakes. The final steps include testing both the new outlet and the existing light switch to ensure independent and safe operation.
Step 6 of 7: Install switch and fixture covers
Carefully push the wired switches back into their electrical boxes and secure them with mounting screws. Attach the switch faceplates. Reattach the light fixture canopy or cover.
Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Step 1: De-energize the circuit
- 0:08–0:36 Turn Off Circuit Breaker
- 0:03–0:08 Turn Off Power at Breaker Panel
- 2:06–2:13 Turn Off Power at Breaker
Step 2: Remove existing switch and light fixture
- 0:16–0:24 Remove Old Light Switch
- 17:23–17:28 Remove the old light switch
- 0:08–0:12 Remove Existing Light Switch
Step 3: Identify and label wires
- 2:06–2:27 Label All Wires
- 4:12–5:29 Identify the Line (Hot) Wire
- 0:25–1:15 Identify Wires and Switch Terminals
Step 4: Install new 3-way switches
- 5:49–6:58 Wire a Three-Way Switch Circuit
- 17:43–19:32 Connect Wires to Second Switch (Method 2)
- 5:22–7:16 Wire the Primary Three-Way Switch
Step 5: Wire the light fixture
- 4:17–4:29 Connect Load Wire to Common (Second Switch Box)
- 2:47–2:56 Connect Common (Light) to Switch 2
- 0:04–0:08 Connect Second Switch to Light Fixture
Step 6: Install switch and fixture covers
- 3:20–3:58 Secure New Switch and Install Button Cover
- 7:25–8:09 Install New Fixture Cover
- 1:42–1:43 Install Light Switch Cover Plate (this video)
Step 7: Restore power and test operation
- 3:39–3:54 Restore Power and Test Functionality
- 7:09–8:19 Restore Power and Test
- 6:26–6:54 Restore Power and Test Switches
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

