Identify Wires and Switch Terminals
From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 3 of 7 · Video by Living Lost:

Showing 0:25–1:15 of the source video. Watch the full video with every moment.
What happens in this clip
Before starting the wiring, it's crucial to understand the components. You will need '14-3 wire', which is characterized by having an extra red wire in addition to the black, white, and bare ground wires found in standard '14-2 wire'. This red wire will serve as one of the 'traveler' wires between the two switches. Each 3-way switch has three terminals for wires: a distinct dark-colored screw (often black) for the 'common' wire, and two lighter-colored screws (often brass) for the 'traveler' wires. The common terminal on the switch receiving power from the panel is where the incoming hot wire connects, and the common terminal on the switch connected to the light fixture is where the outgoing hot wire to the light connects. The two brass terminals on each switch are where the traveler wires connect, allowing power to 'travel' between the switches.
Goal: Understand the purpose of 14-3 wire and identify common and traveler terminals on 3-way switches.
What's used
Tools
- 14-2 Wire
- 14-3 Wire
- 3-Way Switches
About the full video
This project provides a clear explanation and demonstration of how to correctly wire a 3-way light switch system. It addresses common wiring mistakes, particularly concerning the common and traveler wires, and guides through the proper connections for power input, power output to the light, and the traveler wires between the two switches, ensuring the light can be controlled from two different locations.
What's said in this clip
to do it. All right, so a few things before we even get started. First of all, you're going to need 14 three-wire. It has that extra red one. As where you see 14 two doesn't have the red. That red's going to act as your traveler, and that's super important. You need three-way switches. Here you have three terminals for your wire, one common, and two travelers, as opposed to just your normal switch. So, when it comes to wiring a three-way switch, this is the most important thing, your common. Your common's going to be what your power comes into from your panel, and your common is going to be what your power leaves out of to your light fixture. These two brass ones here are just your travelers. Power travels back and forth between the two of them. This supplies your power. This is where your power leaves. So, go
Automatically transcribed from the source video.
Step 3 of 7: Identify and label wires
At the first switch location (e.g., top of stairs), identify the incoming hot wire (usually black), the wire going to the light (switched hot), and the traveler wires. At the second switch location (e.g., bottom of stairs), identify the wire coming from the first switch (traveler) and the wire going to the light (switched hot). At the light fixture, identify the hot wire from the switch, the neutral wire, and the ground wire. Use electrical tape or wire nuts to label each wire clearly (e.g., 'LINE', 'LOAD', 'TRAVELER 1', 'TRAVELER 2').
Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Step 1: De-energize the circuit
- 0:08–0:36 Turn Off Circuit Breaker
- 0:03–0:08 Turn Off Power at Breaker Panel
- 2:06–2:13 Turn Off Power at Breaker
Step 2: Remove existing switch and light fixture
- 0:16–0:24 Remove Old Light Switch
- 17:23–17:28 Remove the old light switch
- 0:08–0:12 Remove Existing Light Switch
Step 3: Identify and label wires
- 2:06–2:27 Label All Wires
- 4:12–5:29 Identify the Line (Hot) Wire
- 0:25–1:15 Identify Wires and Switch Terminals (this video)
Step 4: Install new 3-way switches
- 5:49–6:58 Wire a Three-Way Switch Circuit
- 17:43–19:32 Connect Wires to Second Switch (Method 2)
- 5:22–7:16 Wire the Primary Three-Way Switch
Step 5: Wire the light fixture
- 4:17–4:29 Connect Load Wire to Common (Second Switch Box)
- 2:47–2:56 Connect Common (Light) to Switch 2
- 0:04–0:08 Connect Second Switch to Light Fixture
Step 6: Install switch and fixture covers
- 3:20–3:58 Secure New Switch and Install Button Cover
- 7:25–8:09 Install New Fixture Cover
- 1:42–1:43 Install Light Switch Cover Plate
Step 7: Restore power and test operation
- 3:39–3:54 Restore Power and Test Functionality
- 7:09–8:19 Restore Power and Test
- 6:26–6:54 Restore Power and Test Switches
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

