Turn Off Circuit Breaker
From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 1 of 7 · Video by Kyler's Studio

Showing 0:08–0:36 of the source video. Watch the full video with every moment.
What happens in this clip
Before beginning any electrical work, locate the circuit breaker panel for the room where you will be working. Identify the circuit breaker that controls the lights in that room. Often, rooms are labeled on the panel, in this case, it's labeled 'master'. Flip the identified circuit breaker to the 'off' position to cut power. To verify that the power is indeed off, go back to the light switch and flip it a few times to ensure the lights do not turn on.
Goal: Ensure safety by cutting power to the work area.
What's used
Tools
- Circuit Breaker Panel
About the full video
This project provides step-by-step instructions on how to replace a standard single-pole light switch with a Lutron Caseta wireless dimmer (model PD-6WCL-WH). The process includes ensuring electrical safety, removing the old switch, correctly wiring the new dimmer using wire nuts, mounting it into the wall box, installing a screwless faceplate, and finally, connecting the dimmer to the Lutron Caseta smartphone app for smart home control.
Step 1 of 7: De-energize the circuit
Locate the circuit breaker that controls the stair lights and switch it to the 'OFF' position. If the circuit is not clearly labeled, turn off the main breaker to ensure all power is off.
Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Step 1: De-energize the circuit
- 0:08–0:36 Turn Off Circuit Breaker (this video)
- 0:03–0:08 Turn Off Power at Breaker Panel
- 2:06–2:13 Turn Off Power at Breaker
Step 2: Remove existing switch and light fixture
- 0:16–0:24 Remove Old Light Switch
- 17:23–17:28 Remove the old light switch
- 0:08–0:12 Remove Existing Light Switch
Step 3: Identify and label wires
- 2:06–2:27 Label All Wires
- 4:12–5:29 Identify the Line (Hot) Wire
- 0:25–1:15 Identify Wires and Switch Terminals
Step 4: Install new 3-way switches
- 5:49–6:58 Wire a Three-Way Switch Circuit
- 17:43–19:32 Connect Wires to Second Switch (Method 2)
- 5:22–7:16 Wire the Primary Three-Way Switch
Step 5: Wire the light fixture
- 4:17–4:29 Connect Load Wire to Common (Second Switch Box)
- 2:47–2:56 Connect Common (Light) to Switch 2
- 0:04–0:08 Connect Second Switch to Light Fixture
Step 6: Install switch and fixture covers
- 3:20–3:58 Secure New Switch and Install Button Cover
- 7:25–8:09 Install New Fixture Cover
- 1:42–1:43 Install Light Switch Cover Plate
Step 7: Restore power and test operation
- 3:39–3:54 Restore Power and Test Functionality
- 7:09–8:19 Restore Power and Test
- 6:26–6:54 Restore Power and Test Switches
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

