Connect Common (Light) to Switch 2
From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 5 of 7 · Video by Family Handyman

Showing 2:47–2:56 of the source video. Watch the full video with every moment.
What happens in this clip
Identify the common terminal on the second three-way switch (the darker colored screw). Loop the stripped end of the black wire from the light fixture cable around this common terminal screw in a clockwise direction, and then tighten the screw firmly.
Goal: Attach the black wire going to the light fixture to the common terminal (darker screw) on the second three-way switch.
What's used
Tools
- Screwdriver
About the full video
This video provides a step-by-step guide on how to correctly wire and install three-way switches to control a single light fixture from two different locations. The instructions focus on identifying and connecting the common, traveler, and ground wires, as well as the power source and the light fixture connection, emphasizing electrical safety by ensuring power is off before starting work.
Step 5 of 7: Wire the light fixture
Connect the 'LOAD' wire from the second 3-way switch to the hot terminal of the light fixture. Connect the neutral wire from the electrical box to the neutral terminal of the light fixture. Connect the ground wire from the electrical box to the ground screw on the light fixture.
Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Step 1: De-energize the circuit
- 0:08–0:36 Turn Off Circuit Breaker
- 0:03–0:08 Turn Off Power at Breaker Panel
- 2:06–2:13 Turn Off Power at Breaker
Step 2: Remove existing switch and light fixture
- 0:16–0:24 Remove Old Light Switch
- 17:23–17:28 Remove the old light switch
- 0:08–0:12 Remove Existing Light Switch
Step 3: Identify and label wires
- 2:06–2:27 Label All Wires
- 4:12–5:29 Identify the Line (Hot) Wire
- 0:25–1:15 Identify Wires and Switch Terminals
Step 4: Install new 3-way switches
- 5:49–6:58 Wire a Three-Way Switch Circuit
- 17:43–19:32 Connect Wires to Second Switch (Method 2)
- 5:22–7:16 Wire the Primary Three-Way Switch
Step 5: Wire the light fixture
- 4:17–4:29 Connect Load Wire to Common (Second Switch Box)
- 2:47–2:56 Connect Common (Light) to Switch 2 (this video)
- 0:04–0:08 Connect Second Switch to Light Fixture
Step 6: Install switch and fixture covers
- 3:20–3:58 Secure New Switch and Install Button Cover
- 7:25–8:09 Install New Fixture Cover
- 1:42–1:43 Install Light Switch Cover Plate
Step 7: Restore power and test operation
- 3:39–3:54 Restore Power and Test Functionality
- 7:09–8:19 Restore Power and Test
- 6:26–6:54 Restore Power and Test Switches
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

