Connect Second Switch to Light Fixture
From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 5 of 7 · Video by Starving Electrician

Showing 0:04–0:08 of the source video. Watch the full video with every moment.
What happens in this clip
Next, the diagram illustrates the connection from the second 3-way switch to the light fixture. This wire is known as the 'switch leg' or 'switched hot'. It connects from the common terminal of the second 3-way switch directly to the hot terminal of the light fixture.
Goal: Provide switched power to the light fixture
What's used
Tools
- 3-Way Light Switch (Switch 2) N/A (diagrammatic)
- Light Fixture N/A (diagrammatic)
- Switch Leg Wire (Red Line) N/A (diagrammatic)
About the full video
This project visually explains the wiring diagram for a 3-way light switch system. It demonstrates how two switches can control a single light fixture from different locations, detailing the connections for power, neutral, switch legs, and traveler wires. The animation illustrates the flow of electricity and the function of each switch in turning the light on and off.
What's said in this clip
Simple way of seeing how a three-way's wired. Got to have a power source. Got power to one switch and then switch leg to the other. Switch leg goes to the light. Two travelers go to each switch and then you have a neutral. A light has to have a power going to it and a neutral. Well, a switch leg, power to the switch leg and then the neutral.
Automatically transcribed from the source video.
Step 5 of 7: Wire the light fixture
Connect the 'LOAD' wire from the second 3-way switch to the hot terminal of the light fixture. Connect the neutral wire from the electrical box to the neutral terminal of the light fixture. Connect the ground wire from the electrical box to the ground screw on the light fixture.
Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Step 1: De-energize the circuit
- 0:08–0:36 Turn Off Circuit Breaker
- 0:03–0:08 Turn Off Power at Breaker Panel
- 2:06–2:13 Turn Off Power at Breaker
Step 2: Remove existing switch and light fixture
- 0:16–0:24 Remove Old Light Switch
- 17:23–17:28 Remove the old light switch
- 0:08–0:12 Remove Existing Light Switch
Step 3: Identify and label wires
- 2:06–2:27 Label All Wires
- 4:12–5:29 Identify the Line (Hot) Wire
- 0:25–1:15 Identify Wires and Switch Terminals
Step 4: Install new 3-way switches
- 5:49–6:58 Wire a Three-Way Switch Circuit
- 17:43–19:32 Connect Wires to Second Switch (Method 2)
- 5:22–7:16 Wire the Primary Three-Way Switch
Step 5: Wire the light fixture
- 4:17–4:29 Connect Load Wire to Common (Second Switch Box)
- 2:47–2:56 Connect Common (Light) to Switch 2
- 0:04–0:08 Connect Second Switch to Light Fixture (this video)
Step 6: Install switch and fixture covers
- 3:20–3:58 Secure New Switch and Install Button Cover
- 7:25–8:09 Install New Fixture Cover
- 1:42–1:43 Install Light Switch Cover Plate
Step 7: Restore power and test operation
- 3:39–3:54 Restore Power and Test Functionality
- 7:09–8:19 Restore Power and Test
- 6:26–6:54 Restore Power and Test Switches
How to Wire a 3-way Switch for Stair Lights at the Top and Bottom
Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

