powered by

Connect Load Wire to Common (Second Switch Box)

From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom · Step 5 of 7 · Video by Skills And Trade

Showing 4:17–4:29 of the source video. Watch the full video with every moment.

What happens in this clip

Locate the black 'load' wire, which is the hot wire extending from the second switch box to the light fixture (typically from the 14-2 light cable). This wire will connect to the 'common' terminal on the second 3-way switch. As with the first switch, the common terminal is usually identifiable by its distinct color (e.g., black or dark gray). Strip about 3/4 inch of insulation from the end of the black load wire, form a hook, and wrap it clockwise around the common terminal screw. Tighten the screw firmly to ensure a secure and reliable electrical connection to the light.

Goal: Connect the power output to the light fixture via the common terminal of the second 3-way switch.

What's used

Tools

  • 3-Way Switch
  • Screwdriver
  • Wire Strippers/Cutters

Materials

  • Black Hot Wire (Load Wire)

About the full video

This project provides a step-by-step guide on how to wire a 3-way switch system, enabling control of a light or group of lights from two independent locations. The instructions cover safety precautions, identification of electrical cables, and detailed connections for ground, neutral, line, load, and traveler wires for both switches in the system.

What's said in this clip

neutral wires okay now we're going to splice them together using a wire nut so I'm just going to attach the the black wire doesn't bring the electrical energy to the light also known as a load wire to the black common terminal and tighten it down securely in a clockwise manner now it's time for the red and black traveler wires all right so you put one

Automatically transcribed from the source video.

Step 5 of 7: Wire the light fixture

Connect the 'LOAD' wire from the second 3-way switch to the hot terminal of the light fixture. Connect the neutral wire from the electrical box to the neutral terminal of the light fixture. Connect the ground wire from the electrical box to the ground screw on the light fixture.

Open this step in the guide

Every video in How to Wire a 3-way Switch for Stair Lights at the Top and Bottom

  1. Step 1: De-energize the circuit

  2. Step 2: Remove existing switch and light fixture

  3. Step 3: Identify and label wires

  4. Step 4: Install new 3-way switches

  5. Step 5: Wire the light fixture

  6. Step 6: Install switch and fixture covers

  7. Step 7: Restore power and test operation

Questions about How to Wire a 3-way Switch for Stair Lights at the Top and Bottom

How can I ensure I correctly identify and label the wires for a 3-way switch, especially for a beginner?

The most crucial step is identifying the 'common' wire, which is usually darker (black) and connected to a distinctively colored screw (often black or brass). The other two wires are 'travelers.' Use electrical tape or a marker to clearly label each wire immediately after identification, making sure not to confuse them between the two switch boxes.

What are the common reasons why a newly wired 3-way switch might not work, and how do I troubleshoot?

The most frequent issue is incorrectly wiring the common or traveler wires. If the light only works from one switch, or not at all, double-check that the common wire is correctly connected to the common terminal on both switches. Use your non-contact voltage tester to confirm power is reaching the switches and the fixture, and check all wire nuts for secure connections.

Is wiring a 3-way switch really a beginner-friendly project, and what's the realistic time commitment?

While labeled 'beginner,' it's more complex than a single-pole switch, requiring careful attention to wiring diagrams and wire identification. It's manageable for a patient beginner. The estimated 4 hours is a good realistic timeframe, especially for someone new to 3-way wiring, allowing for careful work and troubleshooting.

What are some alternative options or upgrades I could consider beyond a basic 3-way switch for stair lighting?

You could upgrade to dimmer-compatible 3-way switches to control light intensity, or consider smart 3-way switches for app or voice control. However, smart switches often require a neutral wire in the switch box, which might necessitate additional wiring work if your home is older and lacks one.

Do I need a permit or inspection for installing a 3-way switch system?

Local regulations vary, but any electrical work, even replacing switches, may require a permit and subsequent inspection in your area. Always check with your local building department or code enforcement office before starting the project to ensure compliance and avoid potential issues with home insurance or resale.

How to Wire a 3-way Switch for Stair Lights at the Top and Bottom

Outline for installing a 3-way switch system to control stair lights from both the top and bottom of the stairs.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Connect Load Wire to Common (Second Switch Box) — How to Wire a 3-way Switch for Stair Lights at the Top and Bottom | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.